If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one component of your vehicle guilty – your headlights, also named high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this simple manipulation, and in this article, we are going to discover how to adjust the headlights of your Volkswagen ID.3? To get this done, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Volkswagen ID.3.
Why adjust the headlights of your Volkswagen ID.3?
So let’s start our content with the benefit of adjusting the headlights of your Volkswagen ID.3. For most of us, our headlights are adjusted good enough, and they seem to light up enough during the night. Regrettably this is not constantly the case and checking this setting, either because the headlights on your Volkswagen ID.3 are not bright enough, or because you have the feeling that they are too weak is a good idea .
Adjusting the high beams of your Volkswagen ID.3 for safety
To begin with, the headlight adjustment of a Volkswagen ID.3 must be finished for a very easy safety explanation. Regardless it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to miss out an obstacle driving, or to predict a curve badly. However, if your headlights are too powerful, even if you are meant to switch to low beam lights when you cross a vehicle, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Volkswagen ID.3 . It is therefore important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Volkswagen ID.3 for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Volkswagen ID.3?
We will now move on to the part that interests you the most in this article, how to adjust the headlights of his Volkswagen ID.3? This setting may seem a bit complicated, but by following the guidelines you should have the ability to accomplish it without too much issue.
Preparations to adjust the headlights of a Volkswagen ID.3
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Volkswagen ID.3
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical control of the headlights of your Volkswagen ID.3 (they are generally designated, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Volkswagen ID.3 is coherent, do not think twice to check it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Volkswagen ID.3, please go through our content on this subject.
If you wish more tutorials on the Volkswagen ID.3, go to our Volkswagen ID.3 category.
