If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one component of your vehicle responsible – your headlights, also identified as high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this article, we are going to see how to adjust the headlights of your Volkswagen Caddy? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Volkswagen Caddy.
Why adjust the headlights of your Volkswagen Caddy?
So let’s begin our content with the benefit of adjusting the headlights of your Volkswagen Caddy. For most of us, our headlights are adjusted well enough, and they seem to light up enough through the night. However this is not always the case and examining this setting, either because the headlights on your Volkswagen Caddy are not bright enough, or because you have the impression that they are too weak is a great idea .
Adjusting the high beams of your Volkswagen Caddy for safety
First of all, the headlight adjustment of a Volkswagen Caddy must be done for a basic security motive. Regardless it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle driving, or to anticipate a curve badly. On the other hand, if your headlights are too strong, regardless if you are expected to switch to low beam lights when you cross a vehicle, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your Volkswagen Caddy . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Volkswagen Caddy for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Volkswagen Caddy?
We will now proceed to the part that concerns you the most in this article, how to adjust the headlights of his Volkswagen Caddy? This adjustment might seem a bit difficult, but by following the instructions you should be able to perform it without too much concern.
Preparations to adjust the headlights of a Volkswagen Caddy
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Volkswagen Caddy
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical modification of the headlights of your Volkswagen Caddy (they are usually marked, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Volkswagen Caddy is coherent, do not hesitate to check it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Volkswagen Caddy, please browse our content on this subject matter.
If you need more tutorials on the Volkswagen Caddy, go to our Volkswagen Caddy category.
