If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these cases, there’s only one part of your car responsible – your headlights, as well named high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this article, we are going to discover how to adjust the headlights of your Volkswagen Atlas? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Volkswagen Atlas.
Why adjust the headlights of your Volkswagen Atlas?
So let’s start our content with the benefit of adjusting the headlights of your Volkswagen Atlas. For many of us, our headlights are adjusted good enough, and they seem to light up enough at nighttime. However this is not constantly the case and checking this setting, either because the headlights on your Volkswagen Atlas are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your Volkswagen Atlas for safety
First of all, the headlight adjustment of a Volkswagen Atlas must be conducted for a basic safety motive. Whether it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to anticipate a curve badly. Alternatively, if your headlights are too strong, even if you are meant to switch to low beam lights when you cross a vehicle, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Volkswagen Atlas . It is therefore important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Volkswagen Atlas for legal reasons
In addition to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Volkswagen Atlas?
We will now proceed to the section that concerns you the most in this article, how to adjust the headlights of his Volkswagen Atlas? This adjustment may seem a bit difficult, but by simply following the guidance you should be able to accomplish it without too much trouble.
Preparations to adjust the headlights of a Volkswagen Atlas
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Volkswagen Atlas
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your bonnet, find the screws for horizontal and vertical control of the headlights of your Volkswagen Atlas (they are usually designated, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Volkswagen Atlas is coherent, do not think twice to check it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Volkswagen Atlas, please browse our content on this subject.
If you need more tutorials on the Volkswagen Atlas, go to our Volkswagen Atlas category.
