Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one part of your vehicle responsible – your headlights, as well often known as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this elementary manipulation, and in this post, we are going to see how to adjust the headlights of your Toyota Venza? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Toyota Venza.
Why adjust the headlights of your Toyota Venza?
So let’s begin our article with the interest of adjusting the headlights of your Toyota Venza. For many of us, our headlights are adjusted good enough, and they appear to light up enough after dark. Unfortunately this is not always the circumstance and examining this setting, either because the headlights on your Toyota Venza are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your Toyota Venza for safety
To begin with, the headlight adjustment of a Toyota Venza must be conducted for a simple security motive. Whether it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss out an obstacle while traveling, or to anticipate a curve badly. However, if your headlights are too powerful, even if you are expected to switch to low beam lights when you cross a car, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Toyota Venza . It is consequently necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Toyota Venza for legal reasons
In addition to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Toyota Venza?
We will now move on to the section that concerns you the most in this post, how to adjust the headlights of his Toyota Venza? This adjustment may appear a bit difficult, but by simply following the recommendations you should be able to do it without too much concern.
Preparations to adjust the headlights of a Toyota Venza
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Toyota Venza
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your hood, locate the screws for horizontal and vertical adjustment of the headlights of your Toyota Venza (they are generally marked, and those on top must modify the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Toyota Venza is coherent, do not think twice to verify it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Toyota Venza, please go through our article on this subject.
If you want more tutorials on the Toyota Venza, go to our Toyota Venza category.
