If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one component of your vehicle to blame – your headlights, as well named high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this elementary manipulation, and in this post, we are going to discover how to adjust the headlights of your Peugeot 205? To achieve this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Peugeot 205.
Why adjust the headlights of your Peugeot 205?
So let’s begin our content page with the interest of adjusting the headlights of your Peugeot 205. For most people, our headlights are adjusted well enough, and they seem to light up enough at night. However this is not always the circumstance and examining this setting, either because the headlights on your Peugeot 205 are not bright enough, or because you have the impression that they are too weak is a great idea .
Adjusting the high beams of your Peugeot 205 for safety
First of all, the headlight adjustment of a Peugeot 205 must be done for a very easy safety motive. Whether it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on your way, or to predict a curve badly. On the other hand, if your headlights are too powerful, even if you are meant to switch to low beam lights when you pass a vehicle, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Peugeot 205 . It is consequently important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Peugeot 205 for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Peugeot 205?
We will now move on to the part that concerns you the most in this post, how to adjust the headlights of his Peugeot 205? This setting may appear a bit difficult, but by simply following the guidelines you should have the ability to accomplish it without too much issue.
Preparations to adjust the headlights of a Peugeot 205
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Peugeot 205
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical modification of the headlights of your Peugeot 205 (they are usually marked, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Peugeot 205 is logical, do not hesitate to check it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Peugeot 205, please browse our content page on this subject matter.
If perhaps you have any further questions about the Peugeot 205, do not hesitate to consult our Peugeot 205 category.
