Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one component of your vehicle to blame – your headlights, as well often known as high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this article, we are going to find out how to adjust the headlights of your Peugeot 2008? To do this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Peugeot 2008.
Why adjust the headlights of your Peugeot 2008?
So let’s start our content page with the interest of adjusting the headlights of your Peugeot 2008. For most people, our headlights are adjusted well enough, and they seem to light up enough at nighttime. Unfortunately this is not always the circumstance and checking this setting, either because the headlights on your Peugeot 2008 are not bright enough, or because you have the feeling that they are too weak is a wise decision .
Adjusting the high beams of your Peugeot 2008 for safety
First of all, the headlight adjustment of a Peugeot 2008 must be made for a simple safety reason. Regardless it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to miss out an obstacle driving, or to predict a curve badly. However, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you pass a vehicle, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Peugeot 2008 . It is consequently important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Peugeot 2008 for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Peugeot 2008?
We will now move on to the part that concerns you the most in this article, how to adjust the headlights of his Peugeot 2008? This setting may appear a bit complicated, but by simply following the guidance you should have the ability to complete it without too much issue.
Preparations to adjust the headlights of a Peugeot 2008
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Peugeot 2008
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, find the screws for horizontal and vertical modification of the headlights of your Peugeot 2008 (they are in most cases marked, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Peugeot 2008 is logical, do not think twice to check it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Peugeot 2008, please browse our content page on this subject.
Whenever you have any further questions about the Peugeot 2008, do not hesitate to consult our Peugeot 2008 category.
