Keeping an eye on your car is imperative nowadays, indeed, if you do not do the minimum routine service of it, or if you do not take into account signs of abnormality, you strongly risk to see your car getting in bad conditions. This is exactly the subject we are going to focus on in this article, one of the symptoms that most disturbs drivers is the ABS warning light on Peugeot 2008. In an attempt to help you review this warning light, we will first check out what this ABS warning light corresponds to, then in a second how to handle it if the ABS light is on Peugeot 2008?.

abs-light-stays-on-peugeot-2008

What does the ABS light on Peugeot 2008 mean?

We will start our paper with the definition of an ABS warning light on Peugeot 2008, for this, in first, we will find out what an ABS is, and afterwards, why the ABS light on your car lights up.

What is the ABS on Peugeot 2008?

To start with, it is essential to explain to you what the ABS of your Peugeot 2008 is utilized for so that you can understand the remaining of this content page. The ABS (Anti-lock Braking System) is a system that prevents the wheels of your car from locking during braking. The purpose of this system is to lower the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your Peugeot 2008 is consisting of different components, here they are:

  • Speed sensors on each wheel, which will evaluate if one of the wheels locks up.
  • A hydraulic system and valves that will control the pressure of the pads on the discs to control the braking power of the car
  • A computer that is the control center of your entire ABS system as well as the ABS light of your Peugeot 2008

.
In truth, you can simply experience how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is precisely the behaviour that ABS permits, it will optimise braking to the maximum by associating the phases of pressure on the brake discs and the phases of release to prevent the wheels from locking up.

Meaning of an ABS light on Peugeot 2008

Now we move on to the section that you are most certainly more interested in, meaning of an ABS warning light on a Peugeot 2008? Firstly, it is an orange light, so if it is on it suggest that your ABS system is faulty. You should be aware that once the ABS warning light is on, the ABS will be put into security mode, so you should modify your driving and not take any risks. Here are the different problems that the ABS warning light on your Peugeot 2008 can signal:

  • It could be a simple short circuit, a damaged wiring harness, a faulty relay or fuse. Use a pressure gauge to examine it.
  • A malfunctioning ABS sensor: A malfunction of one of them motives the ABS light on your Peugeot 2008 to come on
  • The ABS hydraulic block of your Peugeot 2008: If it is faulty it is possible that the indicator light will occur and you will no longer be able to use your ABS.
  • The ABS computer: If the computer has a trouble, being the center of all decisions made to operate your ABS, the light will obviously come on.

What if the ABS light turns on on my Peugeot 2008?

We will now move on to the section where we will try to give you some answers to shut off this light, and thus answer the following question, what to do if the ABS light is on on my Peugeot 2008?. The answers will depend on the failure you are going through. Firstly, pass your Peugeot 2008 to the diagnostic tool, if you don’t know how to read a fault code on Peugeot 2008, don’t be reluctant to browse our content page which points out the steps to take. Once you have located the origin of your issue, here are the steps to take to correct it and turn off the ABS light on your Peugeot 2008:

  • Problem of the ECU or the hydraulic block: It can only be adjusted, and in this situation, you will have to go through a specialist, but if it’s dead, it could cost you around 1000€ to change the ECU and 1500 to 2000€ if you have to change both of them.
  • Electrical issue: Once you’ve identified an electrical issue with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, in any other case you’ll have to repair the wiring harness.
  • A faulty sensor: Often a simple cleaning of the sensors will be enough to resolve the issue, in any other case changing a sensor can cost up to a few hundred euros.

To find more tips on the Peugeot 2008, take a look at the Peugeot 2008 category.