Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one component of your vehicle guilty – your headlights, also called high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this simple manipulation, and in this article, we are going to find out how to adjust the headlights of your Mitsubishi Outlander Sport? To do this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Mitsubishi Outlander Sport.
Why adjust the headlights of your Mitsubishi Outlander Sport?
So let’s start our content with the interest of adjusting the headlights of your Mitsubishi Outlander Sport. For many people, our headlights are adjusted well enough, and they seem to light up enough at nighttime. Unfortunately this is not always the case and checking this setting, either because the headlights on your Mitsubishi Outlander Sport are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Mitsubishi Outlander Sport for safety
To begin with, the headlight adjustment of a Mitsubishi Outlander Sport must be made for a very easy security explanation. Whether it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle on your way, or to predict a curve badly. Alternatively, if your headlights are too powerful, even if you are expected to switch to low beam lights when you cross a vehicle, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your Mitsubishi Outlander Sport . It is consequently important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Mitsubishi Outlander Sport for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Mitsubishi Outlander Sport?
We will now move on to the section that concerns you the most in this article, how to adjust the headlights of his Mitsubishi Outlander Sport? This adjustment might seem a bit difficult, but by simply following the recommendations you should have the ability to do it without too much trouble.
Preparations to adjust the headlights of a Mitsubishi Outlander Sport
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
The headlight adjustment of his Mitsubishi Outlander Sport
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, find the screws for horizontal and vertical adjustment of the headlights of your Mitsubishi Outlander Sport (they are generally marked, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Mitsubishi Outlander Sport is logical, do not think twice to verify it after you have driven it, often it may move.
If you want to adjust the fog lights on your Mitsubishi Outlander Sport, please go through our content on this subject.
Whenever you have any further questions about the Mitsubishi Outlander Sport, do not hesitate to consult our Mitsubishi Outlander Sport category.