Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one part of your vehicle to blame – your headlights, also named high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this basic manipulation, and in this article, we are going to discover how to adjust the headlights of your Mitsubishi Asx? To get this done, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Mitsubishi Asx.
Why adjust the headlights of your Mitsubishi Asx?
So let’s start our article with the interest of adjusting the headlights of your Mitsubishi Asx. For most of us, our headlights are adjusted sufficiently, and they seem to light up enough at night. Sadly this is not constantly the case and looking at this setting, either because the headlights on your Mitsubishi Asx are not bright enough, or because you have the feeling that they are too weak is a wise decision .
Adjusting the high beams of your Mitsubishi Asx for safety
To begin with, the headlight adjustment of a Mitsubishi Asx must be carried out for a very easy safety explanation. Regardless it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to ignore an obstacle driving, or to predict a curve badly. On the other hand, if your headlights are too powerful, regardless if you are meant to switch to low beam lights when you cross a vehicle, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Mitsubishi Asx . It is consequently necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Mitsubishi Asx for legal reasons
In addition to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Mitsubishi Asx?
We will now proceed to the section that concerns you the most in this article, how to adjust the headlights of his Mitsubishi Asx? This setting may seem a bit difficult, but by following the guidelines you should be able to accomplish it without too much issue.
Preparations to adjust the headlights of a Mitsubishi Asx
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Mitsubishi Asx
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, locate the screws for horizontal and vertical control of the headlights of your Mitsubishi Asx (they are usually marked, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Mitsubishi Asx is coherent, do not hesitate to verify it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Mitsubishi Asx, please browse our article on this subject.
To get more tips on the Mitsubishi Asx, take a look at the Mitsubishi Asx category.
