Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one component of your car responsible – your headlights, as well called high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this elementary manipulation, and in this article, we are going to discover how to adjust the headlights of your Mercedes Sprinter? To achieve this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Mercedes Sprinter.
Why adjust the headlights of your Mercedes Sprinter?
So let’s begin our content page with the interest of adjusting the headlights of your Mercedes Sprinter. For most people, our headlights are adjusted sufficiently, and they appear to light up enough at nighttime. Sadly this is not always the circumstance and looking at this setting, either because the headlights on your Mercedes Sprinter are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Mercedes Sprinter for safety
First of all, the headlight adjustment of a Mercedes Sprinter must be carried out for a simple safety reason. Regardless it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to fail to see an obstacle while traveling, or to anticipate a curve badly. However, if your headlights are too strong, even if you are expected to switch to low beam lights when you pass a vehicle, the time required to make this change will generally expose the driver in front of you to the headlight beam of your Mercedes Sprinter . It is consequently necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Mercedes Sprinter for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Mercedes Sprinter?
We will now proceed to the section that interests you the most in this article, how to adjust the headlights of his Mercedes Sprinter? This setting may appear a bit complex, but by simply following the guidelines you should have the ability to do it without too much problem.
Preparations to adjust the headlights of a Mercedes Sprinter
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Mercedes Sprinter
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical control of the headlights of your Mercedes Sprinter (they are in most cases marked, and those on top must modify the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Mercedes Sprinter is logical, do not hesitate to verify it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Mercedes Sprinter, please browse our content page on this subject.
If you need more tutorials on the Mercedes Sprinter, go to our Mercedes Sprinter category.
