If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one part of your car responsible – your headlights, also named high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this basic manipulation, and in this post, we are going to see how to adjust the headlights of your Mercedes Benz CLA Class? To achieve this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Mercedes Benz CLA Class.
Why adjust the headlights of your Mercedes Benz CLA Class?
So let’s begin our article with the interest of adjusting the headlights of your Mercedes Benz CLA Class. For many people, our headlights are adjusted sufficiently, and they seem to light up enough during the night. Unfortunately this is not constantly the circumstance and looking at this setting, either because the headlights on your Mercedes Benz CLA Class are not bright enough, or because you have the impression that they are too weak is a great idea .
Adjusting the high beams of your Mercedes Benz CLA Class for safety
To begin with, the headlight adjustment of a Mercedes Benz CLA Class must be done for a basic security motive. Whether it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. Alternatively, if your headlights are too strong, regardless if you are expected to switch to low beam lights when you pass a car, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Mercedes Benz CLA Class . It is therefore necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Mercedes Benz CLA Class for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Mercedes Benz CLA Class?
We will now move on to the part that interests you the most in this post, how to adjust the headlights of his Mercedes Benz CLA Class? This setting might seem a bit complicated, but by simply following the recommendations you should be able to accomplish it without too much problem.
Preparations to adjust the headlights of a Mercedes Benz CLA Class
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Mercedes Benz CLA Class
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, find the screws for horizontal and vertical control of the headlights of your Mercedes Benz CLA Class (they are usually designated, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Mercedes Benz CLA Class is coherent, do not hesitate to verify it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Mercedes Benz CLA Class, please browse our article on this subject matter.
To get more tips on the Mercedes Benz CLA Class, take a look at the Mercedes Benz CLA Class category.
