Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one part of your car at fault – your headlights, as well identified as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this basic manipulation, and in this post, we are going to discover how to adjust the headlights of your Mazda CX 3? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Mazda CX 3.
Why adjust the headlights of your Mazda CX 3?
So let’s begin our content with the benefit of adjusting the headlights of your Mazda CX 3. For most of us, our headlights are adjusted sufficiently, and they appear to light up enough at nighttime. Unfortunately this is not always the circumstance and examining this setting, either because the headlights on your Mazda CX 3 are not bright enough, or because you have the feeling that they are too weak is a great idea .
Adjusting the high beams of your Mazda CX 3 for safety
To begin with, the headlight adjustment of a Mazda CX 3 must be carried out for a very easy security reason. Whether it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss an obstacle while traveling, or to anticipate a curve badly. However, if your headlights are too powerful, even if you are supposed to switch to low beam lights when you pass a vehicle, the time required to make this change will generally expose the driver in front of you to the headlight beam of your Mazda CX 3 . It is consequently important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Mazda CX 3 for legal reasons
In addition to security, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Mazda CX 3?
We will now move on to the section that concerns you the most in this post, how to adjust the headlights of his Mazda CX 3? This adjustment may appear a bit complex, but by following the recommendations you should have the ability to do it without too much issue.
Preparations to adjust the headlights of a Mazda CX 3
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Mazda CX 3
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical modification of the headlights of your Mazda CX 3 (they are in most cases designated, and those on top must modify the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Mazda CX 3 is coherent, do not hesitate to check it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Mazda CX 3, please read our content on this subject matter.
Whenever you have any further questions about the Mazda CX 3, do not hesitate to consult our Mazda CX 3 category.
