Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one component of your vehicle to take responsibility – your headlights, also often known as high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this post, we are going to see how to adjust the headlights of your Lincoln Navigator? To achieve this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Lincoln Navigator.
Why adjust the headlights of your Lincoln Navigator?
So let’s start our article with the interest of adjusting the headlights of your Lincoln Navigator. For many of us, our headlights are adjusted sufficiently, and they seem to light up enough after dark. Unfortunately this is not constantly the case and checking this setting, either because the headlights on your Lincoln Navigator are not bright enough, or because you have the feeling that they are too weak is a good idea .
Adjusting the high beams of your Lincoln Navigator for safety
To begin with, the headlight adjustment of a Lincoln Navigator must be finished for a basic safety explanation. Regardless it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to ignore an obstacle driving, or to anticipate a curve badly. Alternatively, if your headlights are too strong, even if you are supposed to switch to low beam lights when you cross a vehicle, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Lincoln Navigator . It is consequently essential for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Lincoln Navigator for legal reasons
In addition to safety, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Lincoln Navigator?
We will now move on to the part that concerns you the most in this post, how to adjust the headlights of his Lincoln Navigator? This setting may appear a bit difficult, but by following the guidelines you should be able to complete it without too much issue.
Preparations to adjust the headlights of a Lincoln Navigator
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Lincoln Navigator
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical modification of the headlights of your Lincoln Navigator (they are in general marked, and those on top must modify the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Lincoln Navigator is logical, do not think twice to verify it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Lincoln Navigator, please go through our article on this subject matter.
If you want more tutorials on the Lincoln Navigator, go to our Lincoln Navigator category.
