If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one component of your car guilty – your headlights, as well called high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this elementary manipulation, and in this post, we are going to discover how to adjust the headlights of your Lincoln MKZ? To achieve this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Lincoln MKZ.
Why adjust the headlights of your Lincoln MKZ?
So let’s start our article with the benefit of adjusting the headlights of your Lincoln MKZ. For many of us, our headlights are adjusted well enough, and they seem to light up enough at nighttime. However this is not constantly the circumstance and looking at this setting, either because the headlights on your Lincoln MKZ are not bright enough, or because you have the impression that they are too weak is a good idea .
Adjusting the high beams of your Lincoln MKZ for safety
To begin with, the headlight adjustment of a Lincoln MKZ must be finished for a basic safety explanation. Whether it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss out an obstacle driving, or to anticipate a curve badly. However, if your headlights are too strong, even if you are expected to switch to low beam lights when you pass a vehicle, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Lincoln MKZ . It is consequently necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Lincoln MKZ for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Lincoln MKZ?
We will now move on to the section that interests you the most in this post, how to adjust the headlights of his Lincoln MKZ? This adjustment might seem a bit difficult, but by simply following the instructions you should have the ability to perform it without too much issue.
Preparations to adjust the headlights of a Lincoln MKZ
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Lincoln MKZ
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the headlights of your Lincoln MKZ (they are usually marked, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Lincoln MKZ is coherent, do not think twice to verify it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Lincoln MKZ, please read our article on this subject.
If you want more tutorials on the Lincoln MKZ, go to our Lincoln MKZ category.
