Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these scenarios, there’s only one part of your vehicle to take responsibility – your headlights, also often known as high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this elementary manipulation, and in this article, we are going to discover how to adjust the headlights of your Lincoln MKS? To achieve this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Lincoln MKS.
Why adjust the headlights of your Lincoln MKS?
So let’s begin our content page with the interest of adjusting the headlights of your Lincoln MKS. For most people, our headlights are adjusted good enough, and they appear to light up enough through the night. However this is not always the case and looking at this setting, either because the headlights on your Lincoln MKS are not bright enough, or because you have the impression that they are too weak is a good idea .
Adjusting the high beams of your Lincoln MKS for safety
To begin with, the headlight adjustment of a Lincoln MKS must be achieved for a simple security reason. Regardless it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to ignore an obstacle driving, or to predict a curve badly. Alternatively, if your headlights are too strong, even if you are meant to switch to low beam lights when you cross a car, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Lincoln MKS . It is consequently essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Lincoln MKS for legal reasons
In addition to security, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Lincoln MKS?
We will now go forward to the section that interests you the most in this article, how to adjust the headlights of his Lincoln MKS? This setting may appear a bit complicated, but by simply following the recommendations you should be able to accomplish it without too much concern.
Preparations to adjust the headlights of a Lincoln MKS
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Lincoln MKS
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your hood, identify the screws for horizontal and vertical modification of the headlights of your Lincoln MKS (they are in general designated, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Lincoln MKS is coherent, do not think twice to check it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Lincoln MKS, please read our content page on this subject.
If you have any additional questions about the Lincoln MKS, do not hesitate to consult our Lincoln MKS category.
