Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these scenarios, there’s only one component of your vehicle at fault – your headlights, as well identified as high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this elementary manipulation, and in this post, we are going to see how to adjust the headlights of your Land Rover Freelander? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Land Rover Freelander.
Why adjust the headlights of your Land Rover Freelander?
So let’s begin our article with the interest of adjusting the headlights of your Land Rover Freelander. For many people, our headlights are adjusted good enough, and they appear to light up enough at night. Unfortunately this is not constantly the circumstance and checking this setting, either because the headlights on your Land Rover Freelander are not bright enough, or because you have the feeling that they are too weak is a great idea .
Adjusting the high beams of your Land Rover Freelander for safety
To begin with, the headlight adjustment of a Land Rover Freelander must be conducted for a simple security explanation. Whether it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss out an obstacle on your way, or to predict a curve badly. However, if your headlights are too strong, even if you are meant to switch to low beam lights when you cross a vehicle, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your Land Rover Freelander . It is therefore necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Land Rover Freelander for legal reasons
In addition to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Land Rover Freelander?
We will now proceed to the part that concerns you the most in this post, how to adjust the headlights of his Land Rover Freelander? This adjustment may seem a bit complex, but by simply following the guidelines you should have the ability to complete it without too much trouble.
Preparations to adjust the headlights of a Land Rover Freelander
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Land Rover Freelander
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical modification of the headlights of your Land Rover Freelander (they are in general designated, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Land Rover Freelander is logical, do not hesitate to verify it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Land Rover Freelander, please read our article on this subject.
If perhaps you have any additional questions about the Land Rover Freelander, do not hesitate to consult our Land Rover Freelander category.
