Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one component of your car guilty – your headlights, also named high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this simple manipulation, and in this post, we are going to see how to adjust the headlights of your Land Rover Discovery Sport? To achieve this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Land Rover Discovery Sport.

adjust-headlights-land-rover-discovery-sport

Why adjust the headlights of your Land Rover Discovery Sport?

So let’s begin our content with the benefit of adjusting the headlights of your Land Rover Discovery Sport. For most people, our headlights are adjusted well enough, and they appear to light up enough during the night. However this is not always the case and checking this setting, either because the headlights on your Land Rover Discovery Sport are not bright enough, or because you have the feeling that they are too weak is a good idea .

Adjusting the high beams of your Land Rover Discovery Sport for safety

To begin with, the headlight adjustment of a Land Rover Discovery Sport must be achieved for a very easy security motive. Whether it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to miss an obstacle on your way, or to predict a curve badly. On the other hand, if your headlights are too powerful, regardless if you are meant to switch to low beam lights when you cross a car, the time required to make this change will generally expose the driver in front of you to the headlight beam of your Land Rover Discovery Sport . It is therefore necessary for others as well as for you to have an optimal adjustment of your headlights.

Adjusting the headlights of a Land Rover Discovery Sport for legal reasons

Furthermore to security, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Land Rover Discovery Sport?

We will now proceed to the part that interests you the most in this post, how to adjust the headlights of his Land Rover Discovery Sport? This adjustment might seem a bit complex, but by following the recommendations you should have the ability to accomplish it without too much concern.

Preparations to adjust the headlights of a Land Rover Discovery Sport

To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:

  • Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure cautiously.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unnecessary weight from the automobile, just one person should be in the driver’s seat.

The headlight adjustment of his Land Rover Discovery Sport

Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:

  • Open your bonnet, identify the screws for horizontal and vertical adjustment of the headlights of your Land Rover Discovery Sport (they are in most cases marked, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
  • Use a cloth or something else to hide the projector on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
  • Once finished, verify that the headlights setting of your Land Rover Discovery Sport is coherent, do not think twice to verify it after you have driven it, oftentimes it may move.

.
If you want to adjust the fog lights on your Land Rover Discovery Sport, please browse our content on this subject matter.

If you need more guides on the Land Rover Discovery Sport, go to our Land Rover Discovery Sport category.