If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one part of your vehicle to blame – your headlights, as well often known as high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this elementary manipulation, and in this article, we are going to see how to adjust the headlights of your Jeep Gladiator? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Jeep Gladiator.
Why adjust the headlights of your Jeep Gladiator?
So let’s begin our content page with the interest of adjusting the headlights of your Jeep Gladiator. For many people, our headlights are adjusted good enough, and they appear to light up enough at nighttime. However this is not always the circumstance and looking at this setting, either because the headlights on your Jeep Gladiator are not bright enough, or because you have the impression that they are too weak is a great idea .
Adjusting the high beams of your Jeep Gladiator for safety
To begin with, the headlight adjustment of a Jeep Gladiator must be done for a simple safety reason. Regardless it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to miss an obstacle on your way, or to anticipate a curve badly. Alternatively, if your headlights are too strong, even if you are meant to switch to low beam lights when you cross a vehicle, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Jeep Gladiator . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Jeep Gladiator for legal reasons
In addition to safety, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Jeep Gladiator?
We will now proceed to the part that interests you the most in this article, how to adjust the headlights of his Jeep Gladiator? This setting may appear a bit difficult, but by following the instructions you should be able to do it without too much issue.
Preparations to adjust the headlights of a Jeep Gladiator
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Jeep Gladiator
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your hood, find the screws for horizontal and vertical adjustment of the headlights of your Jeep Gladiator (they are in most cases marked, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Jeep Gladiator is logical, do not hesitate to verify it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Jeep Gladiator, please go through our content page on this subject matter.
If perhaps you have any further questions about the Jeep Gladiator, do not hesitate to consult our Jeep Gladiator category.
