Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these cases, there’s only one part of your car to take responsibility – your headlights, as well identified as high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this simple manipulation, and in this article, we are going to see how to adjust the headlights of your hyundai i40? To achieve this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your hyundai i40.
Why adjust the headlights of your hyundai i40?
So let’s begin our content page with the benefit of adjusting the headlights of your hyundai i40. For most of us, our headlights are adjusted good enough, and they seem to light up enough at nighttime. Regrettably this is not always the case and examining this setting, either because the headlights on your hyundai i40 are not bright enough, or because you have the sensation that they are too weak is a wise decision .
Adjusting the high beams of your hyundai i40 for safety
To begin with, the headlight adjustment of a hyundai i40 must be achieved for a very easy security explanation. Whether it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to ignore an obstacle on the road, or to predict a curve badly. However, if your headlights are too powerful, even if you are supposed to switch to low beam lights when you pass a vehicle, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your hyundai i40 . It is consequently necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a hyundai i40 for legal reasons
Furthermore to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a hyundai i40?
We will now proceed to the section that concerns you the most in this article, how to adjust the headlights of his hyundai i40? This adjustment might seem a bit difficult, but by following the recommendations you should have the ability to perform it without too much trouble.
Preparations to adjust the headlights of a hyundai i40
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his hyundai i40
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your hood, locate the screws for horizontal and vertical adjustment of the headlights of your hyundai i40 (they are in general designated, and those on top must modify the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your hyundai i40 is coherent, do not hesitate to verify it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your hyundai i40, please read our content page on this subject.
In the event that you have any further questions about the hyundai i40, do not hesitate to consult our hyundai i40 category.
