If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one part of your vehicle to blame – your headlights, also known as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this basic manipulation, and in this post, we are going to find out how to adjust the headlights of your hyundai i30? To do this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your hyundai i30.
Why adjust the headlights of your hyundai i30?
So let’s begin our content with the benefit of adjusting the headlights of your hyundai i30. For many of us, our headlights are adjusted good enough, and they appear to light up enough at night. Regrettably this is not constantly the circumstance and checking this setting, either because the headlights on your hyundai i30 are not bright enough, or because you have the impression that they are too weak is a good idea .
Adjusting the high beams of your hyundai i30 for safety
First of all, the headlight adjustment of a hyundai i30 must be carried out for a simple safety motive. Regardless it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to ignore an obstacle on the road, or to predict a curve badly. However, if your headlights are too strong, regardless if you are expected to switch to low beam lights when you cross a car, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your hyundai i30 . It is therefore necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a hyundai i30 for legal reasons
In addition to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a hyundai i30?
We will now move on to the section that interests you the most in this post, how to adjust the headlights of his hyundai i30? This setting may seem a bit complicated, but by following the guidelines you should have the ability to complete it without too much issue.
Preparations to adjust the headlights of a hyundai i30
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his hyundai i30
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, find the screws for horizontal and vertical control of the headlights of your hyundai i30 (they are in most cases designated, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your hyundai i30 is logical, do not think twice to check it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your hyundai i30, please go through our content on this subject matter.
To get more tips on the hyundai i30, take a look at the hyundai i30 category.
