If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these cases, there’s only one part of your vehicle to take responsibility – your headlights, also identified as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this article, we are going to see how to adjust the headlights of your Ford Expedition? To achieve this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Ford Expedition.

adjust-headlights-ford-expedition

Why adjust the headlights of your Ford Expedition?

So let’s begin our content page with the interest of adjusting the headlights of your Ford Expedition. For many people, our headlights are adjusted good enough, and they seem to light up enough during the night. However this is not always the circumstance and checking this setting, either because the headlights on your Ford Expedition are not bright enough, or because you have the feeling that they are too weak is a good idea .

Adjusting the high beams of your Ford Expedition for safety

First of all, the headlight adjustment of a Ford Expedition must be conducted for a very easy safety motive. Regardless it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss out an obstacle while traveling, or to predict a curve badly. However, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you cross a car, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Ford Expedition . It is consequently important for others as well as for you to have an ideal adjustment of your headlights.

Adjusting the headlights of a Ford Expedition for legal reasons

In addition to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Ford Expedition?

We will now go forward to the part that interests you the most in this article, how to adjust the headlights of his Ford Expedition? This adjustment may seem a bit complicated, but by following the guidelines you should have the ability to complete it without too much trouble.

Preparations to adjust the headlights of a Ford Expedition

First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:

  • Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure cautiously.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Take out all needless weight from the vehicle, just one person should be in the driver’s seat.

The headlight adjustment of his Ford Expedition

Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:

  • Open your hood, identify the screws for horizontal and vertical adjustment of the headlights of your Ford Expedition (they are usually marked, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
  • Use a cloth or something else to hide the projector on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, check that the headlights setting of your Ford Expedition is coherent, do not hesitate to check it after you have driven it, in some cases it may move.

.
If you want to adjust the fog lights on your Ford Expedition, please go through our content page on this subject matter.

If you need more guides on the Ford Expedition, go to our Ford Expedition category.