Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one component of your vehicle to take responsibility – your headlights, also known as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this simple manipulation, and in this post, we are going to find out how to adjust the headlights of your Ds Ds 4? To achieve this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Ds Ds 4.
Why adjust the headlights of your Ds Ds 4?
So let’s begin our article with the benefit of adjusting the headlights of your Ds Ds 4. For most people, our headlights are adjusted good enough, and they appear to light up enough at night. However this is not always the circumstance and checking this setting, either because the headlights on your Ds Ds 4 are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your Ds Ds 4 for safety
To begin with, the headlight adjustment of a Ds Ds 4 must be done for a very easy security reason. Regardless it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to miss out an obstacle on your way, or to predict a curve badly. However, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you cross a car, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Ds Ds 4 . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Ds Ds 4 for legal reasons
Furthermore to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Ds Ds 4?
We will now move on to the section that interests you the most in this post, how to adjust the headlights of his Ds Ds 4? This adjustment may seem a bit difficult, but by following the instructions you should have the ability to accomplish it without too much concern.
Preparations to adjust the headlights of a Ds Ds 4
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Ds Ds 4
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, locate the screws for horizontal and vertical modification of the headlights of your Ds Ds 4 (they are in general marked, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Ds Ds 4 is logical, do not hesitate to check it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Ds Ds 4, please read our article on this subject.
In the event that you have any further questions about the Ds Ds 4, do not hesitate to consult our Ds Ds 4 category.
