If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one part of your car guilty – your headlights, also known as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this post, we are going to see how to adjust the headlights of your Dodge Durango? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Dodge Durango.
Why adjust the headlights of your Dodge Durango?
So let’s begin our content with the interest of adjusting the headlights of your Dodge Durango. For many people, our headlights are adjusted good enough, and they appear to light up enough during the night. Regrettably this is not constantly the case and examining this setting, either because the headlights on your Dodge Durango are not bright enough, or because you have the feeling that they are too weak is a wise decision .
Adjusting the high beams of your Dodge Durango for safety
First of all, the headlight adjustment of a Dodge Durango must be finished for a very easy security explanation. Whether it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to predict a curve badly. However, if your headlights are too powerful, regardless if you are expected to switch to low beam lights when you cross a car, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Dodge Durango . It is consequently important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Dodge Durango for legal reasons
Furthermore to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Dodge Durango?
We will now proceed to the section that concerns you the most in this post, how to adjust the headlights of his Dodge Durango? This adjustment may seem a bit complex, but by simply following the recommendations you should have the ability to perform it without too much issue.
Preparations to adjust the headlights of a Dodge Durango
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Dodge Durango
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical control of the headlights of your Dodge Durango (they are generally designated, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Dodge Durango is logical, do not hesitate to verify it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Dodge Durango, please read our content on this subject matter.
Whenever you have any further questions about the Dodge Durango, do not hesitate to consult our Dodge Durango category.
