If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one component of your vehicle to take responsibility – your headlights, as well often known as high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this article, we are going to find out how to adjust the headlights of your Dodge Dart? To get this done, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Dodge Dart.
Why adjust the headlights of your Dodge Dart?
So let’s begin our content with the benefit of adjusting the headlights of your Dodge Dart. For many people, our headlights are adjusted well enough, and they appear to light up enough at night. However this is not always the case and checking this setting, either because the headlights on your Dodge Dart are not bright enough, or because you have the feeling that they are too weak is a good idea .
Adjusting the high beams of your Dodge Dart for safety
First of all, the headlight adjustment of a Dodge Dart must be finished for a very easy security reason. Regardless it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to miss out an obstacle driving, or to predict a curve badly. Alternatively, if your headlights are too powerful, even if you are meant to switch to low beam lights when you cross a vehicle, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Dodge Dart . It is therefore necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Dodge Dart for legal reasons
Furthermore to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Dodge Dart?
We will now move on to the section that interests you the most in this article, how to adjust the headlights of his Dodge Dart? This adjustment might seem a bit complicated, but by simply following the recommendations you should have the ability to accomplish it without too much problem.
Preparations to adjust the headlights of a Dodge Dart
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Dodge Dart
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, find the screws for horizontal and vertical control of the headlights of your Dodge Dart (they are in most cases marked, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Dodge Dart is coherent, do not hesitate to verify it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Dodge Dart, please browse our content on this subject.
To get more tips on the Dodge Dart, take a look at the Dodge Dart category.
