Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these scenarios, there’s only one component of your car to take responsibility – your headlights, also called high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this post, we are going to see how to adjust the headlights of your Dodge Avenger? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Dodge Avenger.
Why adjust the headlights of your Dodge Avenger?
So let’s start our content page with the benefit of adjusting the headlights of your Dodge Avenger. For most people, our headlights are adjusted good enough, and they appear to light up enough during the night. However this is not constantly the case and looking at this setting, either because the headlights on your Dodge Avenger are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your Dodge Avenger for safety
To begin with, the headlight adjustment of a Dodge Avenger must be carried out for a basic security explanation. Regardless it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to miss an obstacle while traveling, or to predict a curve badly. Alternatively, if your headlights are too powerful, regardless if you are meant to switch to low beam lights when you cross a car, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Dodge Avenger . It is therefore necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Dodge Avenger for legal reasons
Furthermore to security, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Dodge Avenger?
We will now move on to the part that concerns you the most in this post, how to adjust the headlights of his Dodge Avenger? This adjustment may appear a bit complex, but by simply following the guidelines you should be able to perform it without too much problem.
Preparations to adjust the headlights of a Dodge Avenger
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Dodge Avenger
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, locate the screws for horizontal and vertical control of the headlights of your Dodge Avenger (they are in most cases designated, and those on top must modify the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Dodge Avenger is coherent, do not hesitate to verify it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Dodge Avenger, please browse our content page on this subject matter.
To discover more tips on the Dodge Avenger, take a look at the Dodge Avenger category.
