Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one component of your vehicle to blame – your headlights, also named high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this basic manipulation, and in this article, we are going to see how to adjust the headlights of your Chevrolet HHR? To achieve this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Chevrolet HHR.
Why adjust the headlights of your Chevrolet HHR?
So let’s start our article with the benefit of adjusting the headlights of your Chevrolet HHR. For most of us, our headlights are adjusted sufficiently, and they appear to light up enough at nighttime. Sadly this is not always the case and examining this setting, either because the headlights on your Chevrolet HHR are not bright enough, or because you have the feeling that they are too weak is a great idea .
Adjusting the high beams of your Chevrolet HHR for safety
First of all, the headlight adjustment of a Chevrolet HHR must be done for a basic security explanation. If it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss an obstacle driving, or to anticipate a curve badly. Alternatively, if your headlights are too powerful, even if you are supposed to switch to low beam lights when you pass a car, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your Chevrolet HHR . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Chevrolet HHR for legal reasons
Furthermore to security, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Chevrolet HHR?
We will now go forward to the section that interests you the most in this article, how to adjust the headlights of his Chevrolet HHR? This adjustment may seem a bit complicated, but by simply following the instructions you should have the ability to perform it without too much problem.
Preparations to adjust the headlights of a Chevrolet HHR
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Chevrolet HHR
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your hood, find the screws for horizontal and vertical control of the headlights of your Chevrolet HHR (they are in most cases designated, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Chevrolet HHR is logical, do not think twice to verify it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Chevrolet HHR, please go through our article on this subject matter.
To discover more tips on the Chevrolet HHR, take a look at the Chevrolet HHR category.
