If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one component of your car responsible – your headlights, also called high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this simple manipulation, and in this post, we are going to find out how to adjust the headlights of your Chevrolet Aveo? To achieve this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Chevrolet Aveo.
Why adjust the headlights of your Chevrolet Aveo?
So let’s begin our content with the benefit of adjusting the headlights of your Chevrolet Aveo. For many of us, our headlights are adjusted good enough, and they seem to light up enough at night. Regrettably this is not always the case and examining this setting, either because the headlights on your Chevrolet Aveo are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Chevrolet Aveo for safety
First of all, the headlight adjustment of a Chevrolet Aveo must be conducted for a simple security motive. Whether it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to anticipate a curve badly. Alternatively, if your headlights are too strong, even if you are expected to switch to low beam lights when you pass a car, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Chevrolet Aveo . It is consequently necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Chevrolet Aveo for legal reasons
Furthermore to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Chevrolet Aveo?
We will now move on to the part that interests you the most in this post, how to adjust the headlights of his Chevrolet Aveo? This adjustment may seem a bit complicated, but by simply following the guidance you should be able to accomplish it without too much problem.
Preparations to adjust the headlights of a Chevrolet Aveo
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Chevrolet Aveo
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your hood, locate the screws for horizontal and vertical modification of the headlights of your Chevrolet Aveo (they are in general designated, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Chevrolet Aveo is logical, do not think twice to verify it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Chevrolet Aveo, please read our content on this subject matter.
If you have any additional questions about the Chevrolet Aveo, do not hesitate to consult our Chevrolet Aveo category.
