If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one part of your vehicle to blame – your headlights, as well called high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this elementary manipulation, and in this post, we are going to see how to adjust the headlights of your Cadillac ATS? To achieve this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Cadillac ATS.
Why adjust the headlights of your Cadillac ATS?
So let’s begin our content with the benefit of adjusting the headlights of your Cadillac ATS. For many people, our headlights are adjusted well enough, and they seem to light up enough at nighttime. Unfortunately this is not always the circumstance and checking this setting, either because the headlights on your Cadillac ATS are not bright enough, or because you have the feeling that they are too weak is a great idea .
Adjusting the high beams of your Cadillac ATS for safety
First of all, the headlight adjustment of a Cadillac ATS must be finished for a simple safety motive. Whether it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to fail to see an obstacle driving, or to predict a curve badly. On the other hand, if your headlights are too powerful, regardless if you are meant to switch to low beam lights when you cross a car, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Cadillac ATS . It is therefore necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Cadillac ATS for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Cadillac ATS?
We will now proceed to the part that interests you the most in this post, how to adjust the headlights of his Cadillac ATS? This adjustment may appear a bit complex, but by simply following the instructions you should have the ability to perform it without too much trouble.
Preparations to adjust the headlights of a Cadillac ATS
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Cadillac ATS
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your hood, find the screws for horizontal and vertical control of the headlights of your Cadillac ATS (they are usually designated, and those on top must modify the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Cadillac ATS is coherent, do not think twice to check it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Cadillac ATS, please browse our content on this subject matter.
In the event that you have any additional questions about the Cadillac ATS, do not hesitate to consult our Cadillac ATS category.
