If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one part of your car to take responsibility – your headlights, also called high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this simple manipulation, and in this article, we are going to discover how to adjust the headlights of your Buick Enclave? To achieve this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Buick Enclave.
Why adjust the headlights of your Buick Enclave?
So let’s start our article with the benefit of adjusting the headlights of your Buick Enclave. For the majority of us, our headlights are adjusted good enough, and they seem to light up enough at night. Sadly this is not constantly the circumstance and examining this setting, either because the headlights on your Buick Enclave are not bright enough, or because you have the feeling that they are too weak is a great idea .
Adjusting the high beams of your Buick Enclave for safety
To begin with, the headlight adjustment of a Buick Enclave must be finished for a basic security motive. If it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to miss an obstacle on your way, or to predict a curve badly. On the other hand, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you pass a car, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Buick Enclave . It is therefore important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Buick Enclave for legal reasons
In addition to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Buick Enclave?
We will now move on to the section that interests you the most in this article, how to adjust the headlights of his Buick Enclave? This setting may appear a bit complex, but by following the guidelines you should be able to accomplish it without too much trouble.
Preparations to adjust the headlights of a Buick Enclave
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Buick Enclave
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your hood, find the screws for horizontal and vertical adjustment of the headlights of your Buick Enclave (they are generally marked, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Buick Enclave is coherent, do not hesitate to verify it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Buick Enclave, please browse our article on this subject.
If you need more guides on the Buick Enclave, go to our Buick Enclave category.
