If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one component of your car responsible – your headlights, also often known as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this elementary manipulation, and in this article, we are going to discover how to adjust the headlights of your Audi Q2? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Audi Q2.
Why adjust the headlights of your Audi Q2?
So let’s start our article with the interest of adjusting the headlights of your Audi Q2. For most people, our headlights are adjusted sufficiently, and they appear to light up enough during the night. Regrettably this is not constantly the circumstance and looking at this setting, either because the headlights on your Audi Q2 are not bright enough, or because you have the feeling that they are too weak is a good idea .
Adjusting the high beams of your Audi Q2 for safety
To begin with, the headlight adjustment of a Audi Q2 must be achieved for a simple safety motive. If it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to miss out an obstacle on your way, or to predict a curve badly. However, if your headlights are too powerful, regardless if you are expected to switch to low beam lights when you pass a vehicle, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Audi Q2 . It is consequently necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Audi Q2 for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Audi Q2?
We will now move on to the section that concerns you the most in this article, how to adjust the headlights of his Audi Q2? This setting may appear a bit complex, but by simply following the guidelines you should be able to complete it without too much problem.
Preparations to adjust the headlights of a Audi Q2
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Audi Q2
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical modification of the headlights of your Audi Q2 (they are generally marked, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Audi Q2 is coherent, do not think twice to check it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Audi Q2, please read our article on this subject matter.
Whenever you have any additional questions about the Audi Q2, do not hesitate to consult our Audi Q2 category.
