Your car’s handbrake is actually a obligatory basic safety feature based on the highway code, in fact , it aims to end your Toyota Tundra, even on a slight incline. It must be independent of the main brake controls. It is possible that after some time the wire system of the hand brake will loosen up and you will certainly not pass the technical control or you could feel that it truly is no longer stopping your car. To cope with these complications, we will look at how to adjust the hand brake on your Toyota Tundra . To do this, first we will see the adjustment of the manual handbrake on Toyota Tundra , then simply, in a second step, how to adjust an automatic handbrake, and finally the price of the service performed by a professional.

adjust-handbrake-toyota-tundra

Adjusting a manual handbrake on Toyota Tundra?

Therefore we commence our article with the hand brake adjustment of a Toyota Tundra in its manual version. This version performs in a simple way having a system of wire and anchoring screws that allow you to control the tension on the device and so to modify the stroke on the lever of the handbrake. To act on it you should act on these screws to be able to stretch out the handbrake cable of the Toyota Tundra . In any case, ahead of adjusting the hand brake, you must check that your rear wheels are not blocked through the adjustment. Please find below the detailed technique to carry out this intervention:

  • With the level of the handbrake, remove the plastic console that covers it using the torx screws and clips.
  • Once completed, you should find out a trapdoor on your handbrake, open it up to see the screw and wire system.
  • You will need to locate the locknuts and loosen them with a wrench tool to allow you to replace the cable tension.
  • Now screw on the locking mechanism nuts in both sides, be sure to make the comparable changes on both sides to hold a balanced brake, and check that the hand brake lever of your Toyota Tundra has a stroke of about three notches.
  • Tighten up the locknuts and check the fastening of the tires of your car, if it’s good you can reassemble the set, otherwise tighten again the tightening anchoring screws until you get an optimal configuration

.
If you don’t have access to the handbrake flap of the Toyota Tundra, the adjustment will be exactly the same but it will be done by passing under your car with the level of the handbrake lever. Make sure to place your car on the stand ahead of any action.

How do I adjust the automatic handbrake of my own Toyota Tundra?

Second system of handbrake adjustment in Toyota Tundra , this is an automatic handbrake, as opposed to the manual one, that one is done directly on the brake drums or perhaps calipers, and is designed to adapt automatically towards the wear of the brake shoes or disc brake pads. It may be that if you shortly have to purchase brake pads, the handbrake will lose power, listed below are the steps to consider to examine if the strain of your handbrake is the right one:

  • Realize that an automatic handbrake cannot be modified straight because it is supposed to adapt itself to the use of the disc brake pads or shoes of your Toyota Tundra.
  • You can still examine that the system is functioning properly by putting the automobile on the stand and examining by driving under the motor vehicle that the brake pads are still in good working order.
  • For drum brakes it is required to take apart the brake systems to examine the state of the shoes, we advise you to have it done by a professional.
  • Make sure to replace your disc brake pads if you need to.

What is the price of adjusting the handbrake of Toyota Tundra by a professional?

Finally, if you do not feel comfortable with this procedure, especially since it fears a safety component of your car, namely the adjustment on the handbrake of the Toyota Tundra , we give you advice to go to a auto technician who can adjust the handbrake for a about fifty euros . When you have problems with vibrations when braking on Toyota Tundra, do not hesitate to consult our article which works with this problem.

If you want more tutorials on the Toyota Tundra, go to our Toyota Tundra category.