Your car’s handbrake is a required safety feature according to the highway code, in fact , this aims to end your Scion tC, even on the slight slope. It must be independent of the main brake controls. It will be possible that over time the cable system of the hand brake will relax and you will certainly not pass the technical control or you may possibly feel that it is actually no longer blocking your car. To deal with these concerns, we will look at how to adjust the hand brake on your Scion tC . To do this, first we will see the adjustment of the manual handbrake on Scion tC , after that, in a second step, how to adjust an automatic handbrake, and then the price of the service performed by a professional.
Adjusting a manual handbrake on Scion tC?
So we begin our document with the hand brake adjustment of a Scion tC in its manual version. This version works in a simple way with a system of cable and anchoring screws that allow you to control the tension in the device and thus to modify the stroke in the lever of the handbrake. To act on it you will have to act on these types of screws in order to expand the handbrake cable of the Scion tC . In any case, ahead of adjusting the hand brake, you must be sure your back wheels are not blocked throughout the adjustment. Make sure you find below the detailed procedure to carry out this intervention:
- With the level of your handbrake, remove the plastic console that protects it using the torx screws and clips.
- Once completed, you should see a trapdoor in your handbrake, open it to see the screw and cable system.
- You will need to locate the locknuts and loosen them with a wrench to allow you to change the cable tension.
- Now screw on the locking mechanism nuts in both sides, make certain to make the comparable changes upon both sides to hold a balanced brake, and be sure the hand brake lever of your Scion tC has a stroke of about 3 notches.
- Tighten the locknuts and test out the fastening of the wheels of your car, if it’s good you can reassemble the set, otherwise tighten up again the tightening anchoring screws until you get an ideal configuration
.
If you don’t have access to the handbrake flap of the Scion tC, the adjustment will probably be exactly the same however it will be done by passing underneath your car with the level of your handbrake lever. Make sure you set your car on the stand ahead of any actions.
How do I adjust the automatic handbrake of my own Scion tC?
Second system of handbrake adjustment in Scion tC , this is an automatic handbrake, unlike the manual one, this one is done upon the brake drums or perhaps calipers, which is imagined to adjust automatically to the wear of the brake shoes or pads. It may be that if you shortly have to acquire brake pads, your handbrake will lose power, listed below are the steps to take to verify if the strain of your handbrake is the right one:
- Realize that an automatic handbrake can not be modified straight because it is meant to adapt itself to the have on of the pads or pads of your Scion tC.
- You can nonetheless verify that the system is working properly by putting the automobile on the stand and checking out by driving under the motor vehicle that the disc brake pads are still in good working order.
- For drum brakes it will probably be necessary to take apart the brake systems to verify the state of the shoes, all of us advise you to have it done by a specialist.
- Be sure you replace your pads if you need to.
What is the cost of adjusting the handbrake of Scion tC by a specialist?
Finally, if you do not feel comfortable with this procedure, especially since it concerns a security component of your car, namely the adjustment in the handbrake of the Scion tC , we give you advice to go to a repair shop that can adjust your handbrake for your about fifty euros . For those who have problems with vibrations when braking on Scion tC, do not hesitate to refer to our document which deals with this problem.
To discover more tips on the Scion tC, take a look at the Scion tC category.
