Your car’s handbrake is a obligatory protection feature based on the highway code, in fact , it aims to end your Ram P/U, even over a slight incline. It must be independent of the main brake controls. It will be possible that as time passes the wire system of the hand brake will relax and you will certainly not pass the technical control or you may feel that it really is no longer blocking your car. To deal with these concerns, we will look at how to adjust the hand brake on your Ram P/U . To do this, first we will see the adjustment of the manual handbrake on Ram P/U , in that case, in a second step, how to adjust an automatic handbrake, and ultimately the price of the service performed by a professional.
Adjusting a manual handbrake on Ram P/U?
Thus we commence our article with the hand brake adjustment of a Ram P/U in its manual version. This kind of version performs in a simple way using a system of wire and screws that allow you to manage the tension from the device and so to modify the stroke from the lever of the handbrake. To act on it you will need to act on these kinds of screws to be able to stretch out the handbrake cable of the Ram P/U . In any case, before adjusting the hand brake, you must check that your back wheels are not blocked throughout the adjustment. Please find below the detailed treatment to carry out this kind of intervention:
- On the level of the handbrake, remove the plastic console that protects it using the torx screws and clips.
- Once done, you should discover a trapdoor on your handbrake, open it to see the screw and wire system.
- You will have to locate the locknuts and loosen them with a wrench tool to allow you to change the cable stress.
- Now screw on the lock nuts upon both sides, ensure that you make the exact changes on both sides to hold a balanced braking, and check that the hand brake handle of your Ram P/U has a stroke of about 3 notches.
- Tighten up the locknuts and check the locking of the wheels of your car, if it’s great you can reassemble the set, otherwise tighten again the tightening screws until you get a great optimal setting
.
If you don’t have access to the handbrake flap of the Ram P/U, the adjustment will be exactly the same nonetheless it will be done by passing below your car with the level of the handbrake handle. Make sure set your car on the stand before any actions.
How do I adjust the automatic handbrake of my personal Ram P/U?
Second approach to handbrake adjustment upon Ram P/U , this is an automatic handbrake, as opposed to the manual one, this place is done upon the brake drums or perhaps calipers, which is meant to adapt automatically to the wear of the brake shoes or brake pads. It may be that if you shortly have to acquire brake pads, the handbrake will lose power, here are the steps to consider to examine if the tension of your handbrake is the right one:
- Bear in mind that an automatic handbrake can not be modified straight because it is likely to adapt on its own to the put on of the brake pads or pads of your Ram P/U.
- You can even now examine that the system is working effectively simply by putting the automobile on the stand and examining by driving under the motor vehicle that the pads are still in good performing order.
- For drum brakes it will be necessary to disassemble the tires to examine your the shoes, we recommend you to have it achieved by a specialist.
- Remember to change your brake pads if you need to.
What is the cost of adjusting the handbrake of Ram P/U by a specialist?
Finally, if you do not feel comfortable with this procedure, specifically since it issues a safety element of your car, namely the adjustment from the handbrake of the Ram P/U , we counsel you to go to a technician who are able to adjust the handbrake for a about fifty local currency . If you have problems with vibrations when braking on Ram P/U, do not think twice to consult our article which works with this issue.
In the event that you have any further questions about the Ram P/U, do not hesitate to consult our Ram P/U category.
