Your car’s handbrake is a mandatory safety feature according to the highway code, in fact , this aims to end your Peugeot Rcz, even on the slight slope. It must be in addition to the main brake system controls. It is possible that with time the wire system of the hand brake will loosen up and you will not pass the technical control or you could feel that it can be no longer stopping your car. To deal with these concerns, we will look at how to adjust the hand brake on your Peugeot Rcz . To accomplish this, first we will see the adjustment of the manual handbrake on Peugeot Rcz , then, in a second step, how to adjust an automatic handbrake, and finally the price of the service performed by a professional.
Adjusting a manual handbrake on Peugeot Rcz?
So we start out our content with the hand brake adjustment of a Peugeot Rcz in its manual version. This version performs in a simple way having a system of wire and anchoring screws that allow you to manage the tension on the device and therefore to modify the stroke on the lever of the handbrake. To act on it you must act on these kinds of screws in order to expand the handbrake cable of the Peugeot Rcz . In any case, before adjusting the hand brake, you must be sure your back wheels are certainly not blocked through the adjustment. Make sure you find under the detailed technique to carry out this intervention:
- With the level of your handbrake, remove the plastic console that covers it using the torx screws and clips.
- Once carried out, you should discover a trapdoor in your handbrake, open it to see the screw and wire system.
- You will need to locate the locknuts and loosen them with a wrench to allow you to replace the cable tension.
- Now screw on the lock nuts in both sides, ensure that you make the exact changes upon both sides to keep a balanced brake, and be sure the hand brake lever of your Peugeot Rcz has a stroke of about three notches.
- Tighten up the locknuts and check the fastening of the wheels of your car, if it’s great you can reassemble the set, otherwise tighten up again the tightening anchoring screws until you get an ideal setting
.
If you don’t have access to the handbrake flap of the Peugeot Rcz, the adjustment will be precisely the same but it will be done by passing underneath your car on the level of your handbrake lever. Make sure place your car on the stand before any action.
How do I adjust the automatic handbrake of my Peugeot Rcz?
Second system of handbrake adjustment in Peugeot Rcz , this is an automatic handbrake, contrary to the manual one, that one is done on the brake drums or perhaps calipers, and is supposed to adapt automatically for the wear of the brake shoes or disc brake pads. It may be that if you before long have to get brake pads, your handbrake will suffer power, here are the steps to consider to verify if the strain of your handbrake is the appropriate one:
- Bear in mind that an automatic handbrake can’t be adjusted directly because it is meant to adapt by itself to the don of the disc brake pads or pads of your Peugeot Rcz.
- You can nonetheless verify that the system is functioning correctly simply by putting your vehicle on the stand and looking at by driving under the vehicle that the brake pads are still in good performing order.
- For drum brakes will probably be required to disassemble the brake systems to verify your the shoes, we recommend you to have it conducted by a specialist.
- Remember to change your disc brake pads if you need to.
What is the price of adjusting the handbrake of Peugeot Rcz by a specialist?
Finally, if you do not feel comfortable with this procedure, specifically since it worries a security element of your car, namely the adjustment on the handbrake of the Peugeot Rcz , we advise you to go to a mechanic who are able to adjust your handbrake to get a about fifty local currency . When you have problems with vibrations when braking on Peugeot Rcz, do not hesitate to refer to our content which deals with this problem.
If you want more guides on the Peugeot Rcz, go to our Peugeot Rcz category.
