Your car’s handbrake is a required basic safety feature based on the highway code, in fact , it aims to quit your Nissan Sentra, even on a slight slope. It must be independent of the main brake controls. It is possible that with time the cable system of the hand brake will loosen up and you will not really pass the technical control or you could feel that it really is no longer blocking your car. To address these concerns, we will look at how to adjust the hand brake on your Nissan Sentra . To get this done, first we will see the adjustment of a manual handbrake on Nissan Sentra , in that case, in a second step, how to adjust an automatic handbrake, and lastly the price of the service performed by a professional.
Adjusting a manual handbrake on Nissan Sentra?
Thus we start off our article with the hand brake adjustment of a Nissan Sentra in its manual version. This version performs in a simple way having a system of cable and anchoring screws that allow you to control the tension on the device and so to modify the stroke on the lever of your handbrake. To act on it you must act on these types of screws in order to stretch out the handbrake cable of your Nissan Sentra . In any case, prior to adjusting the hand brake, you must be sure your back wheels aren’t blocked through the adjustment. Please find below the detailed technique to carry out this intervention:
- At the level of the handbrake, remove the plastic console that covers it using the torx screws and clips.
- Once done, you should find out a trapdoor in your handbrake, open it up to see the screw and cable system.
- You need to locate the locknuts and loosen them with a wrench tool to allow you to change the cable stress.
- Now screw on the lock nuts in both sides, make certain to make the comparable changes upon both sides to keep a balanced brake, and be sure the hand brake lever of your Nissan Sentra has a stroke of about 3 notches.
- Tighten the locknuts and check the locking of the wheels of your car, if it’s good you can reassemble the set, otherwise tighten up again the tightening anchoring screws until you get a great ideal setting
.
If you don’t have access to the handbrake flap of your Nissan Sentra, the adjustment will probably be precisely the same but it will be done by passing directly below your car on the level of the handbrake lever. Make sure to set your car on the stand prior to any action.
How do I adjust the automatic handbrake of my own Nissan Sentra?
Second approach to handbrake adjustment in Nissan Sentra , this is an automatic handbrake, not like the manual one, this one is done on the brake drums or calipers, which is designed to adjust automatically for the wear of your brake shoes or pads. It may be that if you before long have to get brake pads, the handbrake will lose power, allow me to share the steps to consider to verify if the tension of your handbrake is the right one:
- Bear in mind that an automatic handbrake cannot be adjusted straight because it is purported to adapt alone to the use of the pads or shoes of your Nissan Sentra.
- You can even now verify that the system is functioning effectively by simply putting the vehicle on the stand and verifying by driving under the motor vehicle that the disc brake pads are still in good working order.
- For drum brakes it can be required to disassemble the tires to verify your the shoes, all of us recommend you to have it carried out by a specialist.
- Make sure to replace your pads if you need to.
What is the price of adjusting the handbrake of Nissan Sentra by a specialist?
Finally, if you do not feel comfortable with this procedure, especially since it issues a security component of your car, namely the adjustment on the handbrake of your Nissan Sentra , we counsel you to go to a mechanic who are able to adjust the handbrake for the about fifty euros . In case you have problems with vibrations when braking on Nissan Sentra, do not think twice to consult our article which deals with this problem.
If you need more tutorials on the Nissan Sentra, go to our Nissan Sentra category.
