Your car’s handbrake is actually a required safety feature based on the highway code, in fact , this aims to end your Mazda 2, even over a slight slope. It must be in addition to the main brake controls. It is possible that over time the wire system of the hand brake will loosen up and you will certainly not pass the technical control or you may well feel that it truly is no longer blocking your car. To deal with these complications, we will look at how to adjust the hand brake on your Mazda 2 . To get this done, first we will see the adjustment of your manual handbrake on Mazda 2 , in that case, in a second step, how to adjust an automatic handbrake, and then finally the price of the service performed by a professional.
Adjusting a manual handbrake on Mazda 2?
So we begin our document with the hand brake adjustment of a Mazda 2 in its manual version. This kind of version performs in a simple way using a system of wire and screws that allow you to manage the tension from the device and so to modify the stroke from the lever of your handbrake. To act on it you should act on these types of screws in order to extend the handbrake cable of your Mazda 2 . In any case, prior to adjusting the hand brake, you must be sure your rear wheels aren’t blocked through the adjustment. Make sure you find under the detailed procedure to carry out this kind of intervention:
- With the level of the handbrake, remove the plastic console that covers it using the torx screws and clips.
- Once performed, you should find out a trapdoor on your handbrake, open it to see the screw and wire system.
- You will have to locate the locknuts and loosen them with a wrench to allow you to replace the cable tension.
- Now screw on the locking mechanism nuts in both sides, make sure to make the same changes upon both sides to hold a balanced brake, and be sure the hand brake lever of your Mazda 2 has a stroke of about three notches.
- Tighten up the locknuts and check the fastening of the rims of your car, if it’s good you can reassemble the set, otherwise tighten again the tightening screws until you get an optimum configuration
.
If you don’t have access to the handbrake flap of your Mazda 2, the adjustment will be exactly the same but it really will be done by passing directly below your car at the level of the handbrake lever. Make sure put your car on the stand prior to any action.
How do I adjust the automatic handbrake of my personal Mazda 2?
Second approach to handbrake adjustment in Mazda 2 , this is an automatic handbrake, not like the manual one, this method is done on the brake drums or perhaps calipers, and it is imagined to change automatically for the wear of your brake shoes or brake pads. It may be that if you soon have to get brake pads, the handbrake will lose power, allow me to share the steps to consider to verify if the strain of your handbrake is the right one:
- Remember that an automatic handbrake cannot be modified straight because it is purported to adapt by itself to the put on of the brake pads or shoes of your Mazda 2.
- You can even now verify that the system is functioning correctly by simply putting the car on the stand and verifying by driving under the automobile that the disc brake pads are still in good performing order.
- For drum brakes it is required to take apart the brake systems to verify the state of the shoes, we suggest you to have it completed by a professional.
- Make sure to change your brake pads if you need to.
What is the price of adjusting the handbrake of Mazda 2 by a professional?
Finally, if you do not feel comfortable with this procedure, specifically since it questions a safety component of your car, namely the adjustment from the handbrake of your Mazda 2 , we give you advice to go to a technician who can adjust the handbrake for any about fifty local currency . For those who have problems with vibrations when braking on Mazda 2, do not wait to refer to our document which refers to this trouble.
If you wish more guides on the Mazda 2, go to our Mazda 2 category.
