Your car’s handbrake is a mandatory basic safety feature based on the highway code, in fact , it aims to stop your Kia Rio 3, even on a slight slope. It must be independent of the main brake system controls. It is possible that as time passes the cable system of the hand brake will loosen up and you will not really pass the technical control or you may possibly feel that it is actually no longer stopping your car. To address these challenges, we will look at how to adjust the hand brake on your Kia Rio 3 . To achieve this, first we will see the adjustment of the manual handbrake on Kia Rio 3 , then, in a second step, how to adjust an automatic handbrake, and ultimately the price of the service performed by a professional.
Adjusting a manual handbrake on Kia Rio 3?
So we start out our content with the hand brake adjustment of a Kia Rio 3 in its manual version. This version works in a basic way with a system of cable and screws that allow you to control the tension of the device and so to modify the stroke of the lever of the handbrake. To act on it you will need to act on these types of screws in order to extend the handbrake cable of the Kia Rio 3 . In any case, ahead of adjusting the hand brake, you must be sure your rear end wheels aren’t blocked during the adjustment. Make sure you find under the detailed process to carry out this intervention:
- On the level of the handbrake, remove the plastic console that covers it using the torx screws and clips.
- Once done, you should find out a trapdoor in your handbrake, open it to see the screw and cable system.
- You will have to locate the locknuts and loosen them with a wrench tool to allow you to replace the cable stress.
- Now screw on the lock nuts upon both sides, make sure you make the comparable changes upon both sides to keep a balanced brake, and be sure the hand brake lever of your Kia Rio 3 has a stroke of about 3 notches.
- Tighten the locknuts and test out the fastening of the tires of your car, if it’s great you can reassemble the set, otherwise tighten up again the tightening screws until you get a great optimum setting
.
If you don’t have access to the handbrake flap of the Kia Rio 3, the adjustment will probably be precisely the same nonetheless it will be done by passing underneath your car on the level of the handbrake lever. Be sure to set your car on the stand ahead of any actions.
How do I adjust the automatic handbrake of my Kia Rio 3?
Second approach to handbrake adjustment upon Kia Rio 3 , this is an automatic handbrake, contrary to the manual one, this is done on the brake drums or calipers, and it is meant to change automatically to the wear of the brake shoes or brake pads. It may be that if you shortly have to acquire brake pads, the handbrake will lose power, here are the steps to take to check if the tension of your handbrake is the right one:
- Be aware that an automatic handbrake can’t be adjusted directly because it is supposed to adapt itself to the have on of the brake pads or shoes of your Kia Rio 3.
- You can even now check that the system is working properly simply by putting the vehicle on the stand and examining by driving under the auto that the pads are still in good functioning order.
- For drum brakes it will be necessary to disassemble the tires to check your the shoes, all of us recommend you to have it performed by a specialist.
- Be sure you change your brake pads if you need to.
What is the cost of adjusting the handbrake of Kia Rio 3 by a specialist?
Finally, if you do not feel comfortable with this procedure, specifically since it worries a security element of your car, namely the adjustment of the handbrake of the Kia Rio 3 , we counsel you to go to a technician that can adjust the handbrake for a about fifty euros . If you have problems with vibrations when braking on Kia Rio 3, do not hesitate to consult our content which deals with this trouble.
If you wish more tutorials on the Kia Rio 3, go to our Kia Rio 3 category.
