Your car’s handbrake is actually a mandatory security feature based on the highway code, in fact , it aims to end your GMC Savana, even over a slight slope. It must be independent of the main brake system controls. It is also possible that with time the cable system of the hand brake will relax and you will certainly not pass the technical control or you may feel that it is no longer blocking your car. To cope with these problems, we will look at how to adjust the hand brake on your GMC Savana . To achieve this, first we will see the adjustment of the manual handbrake on GMC Savana , after that, in a second step, how to adjust an automatic handbrake, and then the price of the service performed by a professional.
Adjusting a manual handbrake on GMC Savana?
Therefore we start our content with the hand brake adjustment of a GMC Savana in its manual version. This kind of version works in a basic way using a system of cable and anchoring screws that allow you to control the tension of the device and thus to modify the stroke of the lever of the handbrake. To act on it you should act on these kinds of screws in order to stretch out the handbrake cable of the GMC Savana . In any case, ahead of adjusting the hand brake, you must make sure that your rear wheels are not blocked during the adjustment. Please find under the detailed technique to carry out this kind of intervention:
- On the level of your handbrake, remove the plastic console that protects it using the torx screws and clips.
- Once carried out, you should see a trapdoor on your handbrake, open it up to see the screw and cable system.
- You will need to locate the locknuts and loosen them with a wrench to allow you to replace the cable pressure.
- Now screw on the lock nuts about both sides, be sure to make the exact changes on both sides to hold a balanced brake, and make sure that the hand brake handle of your GMC Savana has a stroke of about 3 notches.
- Tighten the locknuts and test the fastening of the rims of your car, if it’s very good you can reassemble the set, otherwise tighten again the tightening anchoring screws until you get a great ideal configuration
.
If you don’t have access to the handbrake flap of the GMC Savana, the adjustment will be exactly the same however it will be done by passing below your car at the level of your handbrake handle. Be sure to put your car on the stand ahead of any actions.
How do I adjust the automatic handbrake of my personal GMC Savana?
Second system of handbrake adjustment about GMC Savana , this is an automatic handbrake, not like the manual one, this method is done on the brake drums or calipers, which is imagined to adapt automatically to the wear of the brake shoes or brake pads. It may be that if you shortly have to acquire brake pads, your handbrake will lose power, listed below are the steps for taking to verify if the tension of your handbrake is the right one:
- Be aware that an automatic handbrake can not be adjusted straight because it is purported to adapt on its own to the put on of the brake pads or shoes of your GMC Savana.
- You can still verify that the system is working correctly by simply putting the car on the stand and checking by driving under the motor vehicle that the brake pads are still in good performing order.
- For drum brakes it will probably be necessary to disassemble the brake systems to verify your the shoes, all of us advise you to have it completed by a specialist.
- Remember to replace your brake pads if you need to.
What is the cost of adjusting the handbrake of GMC Savana by a specialist?
Finally, if you do not feel comfortable with this procedure, specifically since it concerns a security element of your car, namely the adjustment of the handbrake of the GMC Savana , we counsel you to go to a motor mechanic that can adjust your handbrake for your about fifty euros . For those who have problems with vibrations when braking on GMC Savana, do not hesitate to consult our content which works with this trouble.
If you need more guides on the GMC Savana, go to our GMC Savana category.
