Your car’s handbrake is a mandatory basic safety feature according to the highway code, in fact , it aims to quit your Fiat Scudo, even on a slight slope. It must be independent of the main brake system controls. It will be possible that over time the wire system of the hand brake will relax and you will not really pass the technical control or you could feel that it is actually no longer blocking your car. To cope with these challenges, we will look at how to adjust the hand brake on your Fiat Scudo . To achieve this, first we will see the adjustment of your manual handbrake on Fiat Scudo , in that case, in a second step, how to adjust an automatic handbrake, and ultimately the price of the service performed by a professional.
Adjusting a manual handbrake on Fiat Scudo?
Thus we commence our article with the hand brake adjustment of a Fiat Scudo in its manual version. This kind of version performs in a basic way using a system of wire and screws that allow you to manage the tension on the device and so to modify the stroke on the lever of the handbrake. To act on it you must act on these screws to be able to stretch out the handbrake cable of the Fiat Scudo . In any case, just before adjusting the hand brake, you must check that your rear wheels are certainly not blocked during the adjustment. Make sure you find below the detailed process to carry out this intervention:
- With the level of the handbrake, remove the plastic console that covers it using the torx screws and clips.
- Once performed, you should find out a trapdoor in your handbrake, open it up to see the screw and wire system.
- You need to locate the locknuts and loosen them with a wrench tool to allow you to replace the cable pressure.
- Now screw on the lock nuts upon both sides, be sure to make the exact changes on both sides to hold a balanced brake, and check that the hand brake lever of your Fiat Scudo has a stroke of about 3 notches.
- Tighten up the locknuts and check the locking of the tires of your car, if it’s great you can reassemble the set, otherwise tighten up again the tightening screws until you get an ideal configuration
.
If you don’t have access to the handbrake flap of the Fiat Scudo, the adjustment will probably be precisely the same however it will be done by passing under your car at the level of the handbrake lever. Remember to set your car on the stand just before any actions.
How do I adjust the automatic handbrake of my Fiat Scudo?
Second approach to handbrake adjustment upon Fiat Scudo , this is an automatic handbrake, in contrast to the manual one, this one is done upon the brake drums or perhaps calipers, which is expected to adapt automatically for the wear of the brake shoes or disc brake pads. It may be that if you rapidly have to buy brake pads, the handbrake will suffer power, here are the steps for taking to examine if the tension of your handbrake is the appropriate one:
- Take note that an automatic handbrake can’t be adjusted directly because it is supposed to adapt themselves to the wear of the disc brake pads or pads of your Fiat Scudo.
- You can even now examine that the system is operating correctly by putting your vehicle on the stand and looking at by driving under the car that the pads are still in good performing order.
- For drum brakes it is necessary to take apart the brake systems to examine the state of the shoes, we recommend you to have it carried out by a specialist.
- Be sure you replace your disc brake pads if you need to.
What is the price of adjusting the handbrake of Fiat Scudo by a specialist?
Finally, if you do not feel comfortable with this procedure, specifically since it fears a safety component of your car, namely the adjustment on the handbrake of the Fiat Scudo , we inform you to go to a auto technician who can adjust the handbrake for a about fifty euros . When you have problems with vibrations when braking on Fiat Scudo, do not hesitate to consult our article which deals with this problem.
To find more tips on the Fiat Scudo, take a look at the Fiat Scudo category.
