Your car’s handbrake is a obligatory security feature according to the highway code, in fact , it aims to end your Fiat 500 L, even on a slight incline. It must be in addition to the main brake controls. It is possible that as time passes the wire system of the hand brake will relax and you will certainly not pass the technical control or you may well feel that it can be no longer stopping your car. To cope with these complications, we will look at how to adjust the hand brake on your Fiat 500 L . To get this done, first we will see the adjustment of your manual handbrake on Fiat 500 L , then simply, in a second step, how to adjust an automatic handbrake, and ultimately the price of the service performed by a professional.
Adjusting a manual handbrake on Fiat 500 L?
So we start our content with the hand brake adjustment of a Fiat 500 L in its manual version. This kind of version works in a basic way using a system of wire and screws that allow you to control the tension with the device and therefore to modify the stroke with the lever of your handbrake. To act on it you need to act on these screws in order to stretch out the handbrake cable of your Fiat 500 L . In any case, prior to adjusting the hand brake, you must be sure your rear end wheels aren’t blocked during the adjustment. Please find below the detailed process to carry out this intervention:
- With the level of your handbrake, remove the plastic console that covers it using the torx screws and clips.
- Once done, you should see a trapdoor in your handbrake, open it to see the screw and wire system.
- You need to locate the locknuts and loosen them with a wrench to allow you to replace the cable pressure.
- Now screw on the lock nuts on both sides, be sure to make the exact changes on both sides to keep a balanced braking, and be sure the hand brake handle of your Fiat 500 L has a stroke of about three notches.
- Tighten up the locknuts and check the fastening of the wheels of your car, if it’s great you can reassemble the set, otherwise tighten up again the tightening screws until you get a great optimal configuration
.
If you don’t have access to the handbrake flap of your Fiat 500 L, the adjustment will be precisely the same however it will be done by passing beneath your car with the level of your handbrake handle. Make sure you put your car on the stand prior to any actions.
How do I adjust the automatic handbrake of my own Fiat 500 L?
Second approach to handbrake adjustment on Fiat 500 L , this is an automatic handbrake, not like the manual one, this is done on the brake drums or perhaps calipers, and is also designed to adjust automatically to the wear of your brake shoes or pads. It may be that if you quickly have to acquire brake pads, your handbrake will lose power, listed below are the steps to consider to verify if the strain of your handbrake is the right one:
- Realize that an automatic handbrake can’t be modified directly because it is meant to adapt itself to the have on of the pads or shoes of your Fiat 500 L.
- You can still verify that the system is operating properly by simply putting your vehicle on the stand and checking by driving under the car that the pads are still in good working order.
- For drum brakes it will probably be required to take apart the brakes to verify the state of the shoes, we advise you to have it conducted by a specialist.
- Remember to change your pads if you need to.
What is the cost of adjusting the handbrake of Fiat 500 L by a specialist?
Finally, if you do not feel comfortable with this procedure, specifically since it concerns a safety element of your car, namely the adjustment with the handbrake of your Fiat 500 L , we inform you to go to a mechanic that can adjust your handbrake for a about fifty local currency . For those who have problems with vibrations when braking on Fiat 500 L, do not hesitate to consult our content which refers to this trouble.
To discover more tips on the Fiat 500 L, take a look at the Fiat 500 L category.
