Your car’s handbrake is actually a required basic safety feature based on the highway code, in fact , it aims to end your Citroen C6, even on a slight slope. It must be in addition to the main brake system controls. It is possible that over time the wire system of the hand brake will relax and you will not really pass the technical control or you might feel that it really is no longer blocking your car. To address these complications, we will look at how to adjust the hand brake on your Citroen C6 . To accomplish this, first we will see the adjustment of your manual handbrake on Citroen C6 , after that, in a second step, how to adjust an automatic handbrake, and then finally the price of the service performed by a professional.
Adjusting a manual handbrake on Citroen C6?
Thus we begin our document with the hand brake adjustment of a Citroen C6 in its manual version. This kind of version works in a simple way with a system of wire and screws that allow you to manage the tension in the device and therefore to modify the stroke in the lever of your handbrake. To act on it you need to act on these kinds of screws in order to extend the handbrake cable of your Citroen C6 . In any case, ahead of adjusting the hand brake, you must make sure that your rear end wheels are not blocked through the adjustment. Make sure you find under the detailed technique to carry out this intervention:
- At the level of the handbrake, remove the plastic console that covers it using the torx screws and clips.
- Once performed, you should see a trapdoor on your handbrake, open it up to see the screw and wire system.
- You will need to locate the locknuts and loosen them with a wrench tool to allow you to replace the cable pressure.
- Now screw on the locking mechanism nuts in both sides, make certain to make the same changes upon both sides to hold a balanced braking, and make sure that the hand brake lever of your Citroen C6 has a stroke of about 3 notches.
- Tighten up the locknuts and check the locking of the rims of your car, if it’s very good you can reassemble the set, otherwise tighten up again the tightening screws until you get a great optimal configuration
.
If you don’t have access to the handbrake flap of your Citroen C6, the adjustment will be precisely the same but it surely will be done by passing beneath your car at the level of the handbrake lever. Make sure to place your car on the stand ahead of any actions.
How do I adjust the automatic handbrake of my Citroen C6?
Second system of handbrake adjustment in Citroen C6 , this is an automatic handbrake, unlike the manual one, this method is done on the brake drums or calipers, and is supposed to adapt automatically to the wear of your brake shoes or pads. It may be that if you before long have to acquire brake pads, the handbrake will suffer power, listed below are the steps to take to examine if the tension of your handbrake is the right one:
- Be aware that an automatic handbrake cannot be modified directly because it is meant to adapt by itself to the have on of the pads or shoes of your Citroen C6.
- You can even now examine that the system is operating correctly by putting the vehicle on the stand and verifying by driving under the vehicle that the disc brake pads are still in good working order.
- For drum brakes it is required to disassemble the brakes to examine your the shoes, we recommend you to have it carried out by a professional.
- Be sure you change your pads if you need to.
What is the cost of adjusting the handbrake of Citroen C6 by a professional?
Finally, if you do not feel comfortable with this procedure, especially since it issues a security component of your car, namely the adjustment in the handbrake of your Citroen C6 , we give you advice to go to a repair shop who are able to adjust the handbrake for the about fifty euros . If you have problems with vibrations when braking on Citroen C6, do not think twice to consult our document which works with this trouble.
If you need more guides on the Citroen C6, go to our Citroen C6 category.
