Your car’s handbrake is a required security feature according to the highway code, in fact , this aims to end your Audi Sq7, even over a slight slope. It must be independent of the main brake system controls. It is also possible that with time the cable system of the hand brake will relax and you will not pass the technical control or you may well feel that it truly is no longer stopping your car. To cope with these challenges, we will look at how to adjust the hand brake on your Audi Sq7 . To get this done, first we will see the adjustment of your manual handbrake on Audi Sq7 , in that case, in a second step, how to adjust an automatic handbrake, and then the price of the service performed by a professional.
Adjusting a manual handbrake on Audi Sq7?
Thus we start out our article with the hand brake adjustment of a Audi Sq7 in its manual version. This kind of version performs in a basic way using a system of cable and screws that allow you to control the tension with the device and therefore to modify the stroke with the lever of your handbrake. To act on it you will have to act on these types of screws in order to expand the handbrake cable of your Audi Sq7 . In any case, ahead of adjusting the hand brake, you must be sure your rear end wheels are certainly not blocked through the adjustment. Make sure you find under the detailed method to carry out this kind of intervention:
- On the level of your handbrake, remove the plastic console that protects it using the torx screws and clips.
- Once completed, you should see a trapdoor on your handbrake, open it up to see the screw and cable system.
- You will have to locate the locknuts and loosen them with a wrench tool to allow you to replace the cable pressure.
- Now screw on the locking mechanism nuts upon both sides, make certain to make the comparable changes upon both sides to hold a balanced brake, and be sure the hand brake lever of your Audi Sq7 has a stroke of about three notches.
- Tighten the locknuts and test the fastening of the wheels of your car, if it’s very good you can reassemble the set, otherwise tighten again the tightening screws until you get an optimal setting
.
If you don’t have access to the handbrake flap of your Audi Sq7, the adjustment will probably be exactly the same but it really will be done by passing under your car with the level of your handbrake lever. Make sure set your car on the stand ahead of any actions.
How do I adjust the automatic handbrake of my personal Audi Sq7?
Second approach to handbrake adjustment upon Audi Sq7 , this is an automatic handbrake, not like the manual one, that one is done directly on the brake drums or perhaps calipers, and it is meant to change automatically towards the wear of your brake shoes or disc brake pads. It may be that if you quickly have to buy brake pads, your handbrake will suffer power, listed below are the steps for taking to verify if the tension of your handbrake is the right one:
- Remember that an automatic handbrake can’t be modified directly because it is meant to adapt themselves to the wear of the disc brake pads or shoes of your Audi Sq7.
- You can nonetheless verify that the system is operating correctly by simply putting your vehicle on the stand and checking by driving under the car that the disc brake pads are still in good working order.
- For drum brakes it is necessary to disassemble the tires to verify your the shoes, we all recommend you to have it done by a professional.
- Be sure you change your disc brake pads if you need to.
What is the cost of adjusting the handbrake of Audi Sq7 by a professional?
Finally, if you do not feel comfortable with this procedure, specifically since it issues a security component of your car, namely the adjustment with the handbrake of your Audi Sq7 , we inform you to go to a technician that can adjust your handbrake for your about fifty euros . When you have problems with vibrations when braking on Audi Sq7, do not wait to consult our article which works with this issue.
If you need more tutorials on the Audi Sq7, go to our Audi Sq7 category.
