Your car’s handbrake is a obligatory protection feature according to the highway code, in fact , this aims to quit your Audi S3, even on a slight slope. It must be independent of the main brake system controls. It will be possible that after some time the cable system of the hand brake will loosen up and you will not really pass the technical control or you might feel that it really is no longer stopping your car. To address these complications, we will look at how to adjust the hand brake on your Audi S3 . To accomplish this, first we will see the adjustment of the manual handbrake on Audi S3 , then simply, in a second step, how to adjust an automatic handbrake, and ultimately the price of the service performed by a professional.
Adjusting a manual handbrake on Audi S3?
Therefore we commence our article with the hand brake adjustment of a Audi S3 in its manual version. This kind of version performs in a basic way using a system of cable and screws that allow you to manage the tension from the device and so to modify the stroke from the lever of the handbrake. To act on it you will need to act on these screws to be able to stretch the handbrake cable of the Audi S3 . In any case, before adjusting the hand brake, you must be sure your rear wheels are not blocked throughout the adjustment. Please find below the detailed treatment to carry out this intervention:
- On the level of the handbrake, remove the plastic console that covers it using the torx screws and clips.
- Once done, you should find out a trapdoor on your handbrake, open it to see the screw and cable system.
- You need to locate the locknuts and loosen them with a wrench to allow you to replace the cable stress.
- Now screw on the locking mechanism nuts in both sides, make certain to make the same changes upon both sides to hold a balanced braking, and be sure the hand brake handle of your Audi S3 has a stroke of about 3 notches.
- Tighten up the locknuts and test the fastening of the wheels of your car, if it’s very good you can reassemble the set, otherwise tighten up again the tightening screws until you get an ideal setting
.
If you don’t have access to the handbrake flap of the Audi S3, the adjustment will probably be precisely the same but it really will be done by passing directly below your car on the level of the handbrake handle. Make sure put your car on the stand before any actions.
How do I adjust the automatic handbrake of my own Audi S3?
Second system of handbrake adjustment in Audi S3 , this is an automatic handbrake, unlike the manual one, this place is done directly on the brake drums or perhaps calipers, and is also meant to adapt automatically to the wear of the brake shoes or disc brake pads. It may be that if you shortly have to buy brake pads, the handbrake will lose power, allow me to share the steps to take to examine if the strain of your handbrake is the right one:
- Realize that an automatic handbrake cannot be modified directly because it is designed to adapt on its own to the wear of the disc brake pads or shoes of your Audi S3.
- You can even now examine that the system is functioning correctly by putting the vehicle on the stand and examining by driving under the vehicle that the disc brake pads are still in good functioning order.
- For drum brakes it can be necessary to disassemble the brake systems to examine your the shoes, we all suggest you to have it carried out by a professional.
- Make sure to change your disc brake pads if you need to.
What is the cost of adjusting the handbrake of Audi S3 by a professional?
Finally, if you do not feel comfortable with this procedure, specifically since it concerns a safety element of your car, namely the adjustment from the handbrake of the Audi S3 , we give you advice to go to a motor mechanic who are able to adjust the handbrake for your about fifty local currency . For those who have problems with vibrations when braking on Audi S3, do not think twice to refer to our article which deals with this problem.
To discover more tips on the Audi S3, take a look at the Audi S3 category.
