Your car’s handbrake is actually a required basic safety feature based on the highway code, in fact , it aims to quit your Audi A4, even on a slight slope. It must be independent of the main brake controls. It will be possible that after some time the wire system of the hand brake will loosen up and you will not pass the technical control or you may possibly feel that it can be no longer blocking your car. To cope with these complications, we will look at how to adjust the hand brake on your Audi A4 . To achieve this, first we will see the adjustment of a manual handbrake on Audi A4 , in that case, in a second step, how to adjust an automatic handbrake, and lastly the price of the service performed by a professional.
Adjusting a manual handbrake on Audi A4?
So we start off our document with the hand brake adjustment of a Audi A4 in its manual version. This kind of version works in a simple way using a system of wire and anchoring screws that allow you to manage the tension on the device and thus to modify the stroke on the lever of the handbrake. To act on it you need to act on these screws in order to stretch the handbrake cable of the Audi A4 . In any case, ahead of adjusting the hand brake, you must be sure your back wheels are not blocked during the adjustment. Please find under the detailed technique to carry out this kind of intervention:
- In the level of the handbrake, remove the plastic console that protects it using the torx screws and clips.
- Once done, you should see a trapdoor in your handbrake, open it to see the screw and wire system.
- You will have to locate the locknuts and loosen them with a wrench tool to allow you to replace the cable pressure.
- Now screw on the locking mechanism nuts about both sides, make certain to make the exact changes upon both sides to keep a balanced braking, and be sure the hand brake handle of your Audi A4 has a stroke of about three notches.
- Tighten up the locknuts and check the locking of the rims of your car, if it’s great you can reassemble the set, otherwise tighten up again the tightening anchoring screws until you get a great optimal configuration
.
If you don’t have access to the handbrake flap of the Audi A4, the adjustment will probably be exactly the same but it will be done by passing below your car on the level of the handbrake handle. Remember to set your car on the stand ahead of any action.
How do I adjust the automatic handbrake of my Audi A4?
Second system of handbrake adjustment about Audi A4 , this is an automatic handbrake, unlike the manual one, this is done upon the brake drums or calipers, and is also meant to change automatically for the wear of the brake shoes or pads. It may be that if you shortly have to get brake pads, the handbrake will suffer power, here are the steps for taking to examine if the tension of your handbrake is the appropriate one:
- Remember that an automatic handbrake can’t be modified directly because it is supposed to adapt itself to the don of the pads or pads of your Audi A4.
- You can nonetheless examine that the system is working correctly by simply putting your vehicle on the stand and checking by driving under the vehicle that the brake pads are still in good working order.
- For drum brakes it will probably be required to take apart the tires to examine the state of the shoes, we all encourage you to have it completed by a professional.
- Be sure you change your pads if you need to.
What is the price of adjusting the handbrake of Audi A4 by a professional?
Finally, if you do not feel comfortable with this procedure, specifically since it fears a safety component of your car, namely the adjustment on the handbrake of the Audi A4 , we counsel you to go to a mechanic that can adjust the handbrake to get a about fifty euros . If you have problems with vibrations when braking on Audi A4, do not wait to consult our document which refers to this issue.
If you have any additional questions about the Audi A4, do not hesitate to consult our Audi A4 category.
