Regardless whether you feel you can’t see good enough after dark, whether you feel you’re lighting too low or too high, in all of these situations, there’s only one component of your motor vehicle to blame – your low beams. Despite the fact this adjustment may look simple thanks to the thumbwheel on your dashboard, a full adjustment is much more complicated than this simple manipulation, and in this content, we will find out how to adjust the low beam lights of your Volkswagen Touran 2? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Volkswagen Touran 2.
Why set the low beam lights of your Volkswagen Touran 2?
So let’s begin our content with the advantage of adjusting the low beam lights of your Volkswagen Touran 2. For a lot of people these lights are well enough adjusted, and it looks like that they light up enough at night. Unfortunately this is not automatically the case and examining this setting, either because the low beams of your Volkswagen Touran 2 are not illuminating well, or because you have the sense that they are too low or too strong is a good plan .
Adjusting the low beam of your Volkswagen Touran 2 for safety is a good plan.
First of all, the adjusting of the dipped headlights of an Volkswagen Touran 2 must be done for a ordinary safety reason. Regardless it’s for you, or for the other drivers you encounter during your night trips. In fact, if you don’t see enough, the real danger is to miss an obstacle on the road, or to anticipate a curve badly. On the flip side, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself at risk. It is subsequently fundamental for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Volkswagen Touran 2 for law motives
Moreover to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Volkswagen Touran 2?
We will now go forward to the part that interests you the most in this content, how to adjust the low beams of his Volkswagen Touran 2? This setting may sound a bit complex, but if you stick to the guidelines you should be able to do it without too much issue.
Preparations to set the low beam of a Volkswagen Touran 2
To start, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your motor vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure rigorously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Volkswagen Touran 2
Once your motor vehicle is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the guidelines to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Volkswagen Touran 2 (they are commonly marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, examine that the low beam setting of your Volkswagen Touran 2 is consistent on the road, do not be reluctant to examine that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Volkswagen Touran 2, please examine our content on this subject.
If you wish more tutorials on the Volkswagen Touran 2, go to our Volkswagen Touran 2 category.
