Regardless whether you feel you can’t see good enough through the night, regardless whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your motor vehicle to blame – your low beams. Even though this adjustment may seem to be easy to do thanks to the thumbwheel on your dashboard, a whole adjustment is much more complicated than this ordinary manipulation, and in this content, we will find out how to adjust the low beam lights of your Volkswagen Polo 8? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Volkswagen Polo 8.
Why adjust the low beam lights of your Volkswagen Polo 8?
So let’s begin our content with the benefit of adjusting the low beam lights of your Volkswagen Polo 8. For many people these lights are sufficiently adjusted, and it looks like that they light up enough at night. However this is not necessarily the case and checking this setting, either because the low beams of your Volkswagen Polo 8 are not illuminating well, or because you have the feeling that they are too weak or too strong is a good plan .
Adjusting the low beam of your Volkswagen Polo 8 for security is a good plan.
First of all, the adjusting of the dipped headlights of an Volkswagen Polo 8 must be done for a elementary security cause. Whether it’s for you, or for the other users you encounter during your night journeys. In reality, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to predict a curve badly. On the contrary, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is consequently imperative for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Volkswagen Polo 8 for law justifications
In addition to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Volkswagen Polo 8?
We will now go forward to the section that concerns you the most in this content, how to adjust the low beams of his Volkswagen Polo 8? This setting may seem a bit complicated, but if you stick to the instructions you should be able to do it without too much problem.
Preparations to set the low beam of a Volkswagen Polo 8
First of all, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your motor vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure rigorously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Volkswagen Polo 8
Once your motor vehicle is in position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the steps to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Volkswagen Polo 8 (they are almost always marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, check that the low beam setting of your Volkswagen Polo 8 is consistent on the road, do not hesitate to check that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Volkswagen Polo 8, please examine our content on this subject.
Whenever you have any additional questions about the Volkswagen Polo 8, do not hesitate to consult our Volkswagen Polo 8 category.
