Regardless whether you feel you can’t see as well at night, regardless whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your motor vehicle to blame – your low beams. Even though this correction may seem to be easy thanks to the thumbwheel on your dashboard, a whole correction is much more complex than this ordinary manipulation, and in this article, we will find out how to adjust the low beam lights of your Volkswagen Arteon? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Volkswagen Arteon.
Why adjust the low beam lights of your Volkswagen Arteon?
So let’s begin our article with the point of adjusting the low beam lights of your Volkswagen Arteon. For most people these lights are sufficiently adjusted, and it looks like that they light up enough at night. Sadly this is not automatically the case and examining this setting, either because the low beams of your Volkswagen Arteon are not illuminating well, or because you have the feeling that they are too low or too powerful is a good option .
Adjusting the low beam of your Volkswagen Arteon for security is a good option.
To start, the adjusting of the dipped headlights of an Volkswagen Arteon must be done for a basic security cause. Regardless it’s for you, or for the other drivers you come across during your night trips. In reality, if you don’t see enough, the risk is to miss an obstacle on the route, or to anticipate a curve badly. On the flip side, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is therefore imperative for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Volkswagen Arteon for legal justifications
Additionally to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Volkswagen Arteon?
We will now move on to the part that interests you the most in this article, how to adjust the low beams of his Volkswagen Arteon? This setting may appear to be a bit difficult, but if you stick to the instructions you should be able to do it without too much issue.
Preparations to set the low beam of a Volkswagen Arteon
To start, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your motor vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure rigorously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Volkswagen Arteon
Once your motor vehicle is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Volkswagen Arteon (they are usually marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once done, verify that the low beam setting of your Volkswagen Arteon is consistent on the road, do not hesitate to verify that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Volkswagen Arteon, please browse our article on this subject.
If perhaps you have any further questions about the Volkswagen Arteon, do not hesitate to consult our Volkswagen Arteon category.
