Regardless whether you feel you can’t see as well during the night, whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your vehicle to blame – your low beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complicated than this basic manipulation, and in this article, we will see how to adjust the low beam lights of your Toyota Land Cruiser Serie 90? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Toyota Land Cruiser Serie 90.
Why set the low beam lights of your Toyota Land Cruiser Serie 90?
So let’s begin our article with the interest of adjusting the low beam lights of your Toyota Land Cruiser Serie 90. For a lot of people these lights are good enough adjusted, and it looks like that they light up enough at night. Sadly this is not constantly the case and checking out this setting, either because the low beams of your Toyota Land Cruiser Serie 90 are not illuminating well, or because you have the sense that they are too weak or too powerful is a wise decision .
Adjusting the low beam of your Toyota Land Cruiser Serie 90 for security is a wise decision.
First of all, the adjusting of the dipped headlights of an Toyota Land Cruiser Serie 90 must be done for a ordinary security reason. Regardless whether it’s for you, or for the other users you come across during your night trips. In reality, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to predict a curve badly. On the flip side, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself at risk. It is consequently important for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Toyota Land Cruiser Serie 90 for law reasons
In addition to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another regulation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Toyota Land Cruiser Serie 90?
We will now go forward to the part that interests you the more in this article, how to adjust the low beams of his Toyota Land Cruiser Serie 90? This setting may appear to be a bit complex, but if you follow the instructions you should be able to do it without too much issue.
Preparations to set the low beam of a Toyota Land Cruiser Serie 90
First of all, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure precisely.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Toyota Land Cruiser Serie 90
Once your vehicle is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the basic steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Toyota Land Cruiser Serie 90 (they are in most cases marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once done, verify that the low beam setting of your Toyota Land Cruiser Serie 90 is consistent on the road, do not be reluctant to verify that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Toyota Land Cruiser Serie 90, please go through our article on this subject.
If you want more guides on the Toyota Land Cruiser Serie 90, go to our Toyota Land Cruiser Serie 90 category.
