Whether you feel you can’t see properly during the night, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your automobile to blame – your low beams. Although this correction may seem to be simple thanks to the thumbwheel on your dashboard, a complete correction is much more technical than this common modification, and in this article content, we will find out how to adjust the low beam lights of your Opel Zafira 3? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Opel Zafira 3.
Why adjust the low beam lights of your Opel Zafira 3?
So let’s start our article content with the advantage of adjusting the low beam lights of your Opel Zafira 3. For many people these lights are sufficiently adjusted, and it looks like that they light up enough at night. Unfortunately this is not automatically the case and looking at this setting, either because the low beams of your Opel Zafira 3 are not illuminating well, or because you have the feeling that they are too low or too strong is a good plan .
Adjusting the low beam of your Opel Zafira 3 for security is a good plan.
First of all, the adjusting of the dipped headlights of an Opel Zafira 3 must be done for a simple security purpose. Regardless whether it’s for you, or for the other drivers you encounter during your night trips. In fact, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to anticipate a curve badly. In contrast, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is as a consequence important for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Opel Zafira 3 for legal motives
Additionally to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Opel Zafira 3?
We will now move on to the section that interests you the most in this article content, how to adjust the low beams of his Opel Zafira 3? This setting may appear a bit complex, but if you stick to the guidelines you should be able to do it without too much problem.
Preparations to set the low beam of a Opel Zafira 3
Firstly, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your automobile on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure precisely.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Opel Zafira 3
Once your automobile is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your automobile up to a distance of between 7 and 10 metres. For the rest of the task here are the simple steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Opel Zafira 3 (they are in most cases marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once done, examine that the low beam setting of your Opel Zafira 3 is consistent on the road, do not hesitate to examine that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Opel Zafira 3, please examine our article content on this subject.
If you need more guides on the Opel Zafira 3, go to our Opel Zafira 3 category.
