Whether you feel you can’t see properly through the night, regardless you feel you’re lighting too low or too high, in all of these situations, there’s only one component of your automobile to blame – your low beams. Although this correction may appear easy to do thanks to the thumbwheel on your dashboard, a whole correction is much more complicated than this simple manipulation, and in this content page, we will discover how to adjust the low beam lights of your Mitsubishi Outlander Sport? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Mitsubishi Outlander Sport.
Why set the low beam lights of your Mitsubishi Outlander Sport?
So let’s begin our content page with the advantage of adjusting the low beam lights of your Mitsubishi Outlander Sport. For the majority of us these lights are sufficiently adjusted, and it looks like that they light up enough at night. However this is not necessarily the case and looking at this setting, either because the low beams of your Mitsubishi Outlander Sport are not lighting up well, or because you have the sense that they are too weak or too strong is a wise decision .
Adjusting the low beam of your Mitsubishi Outlander Sport for safety is a wise decision.
To start, the adjusting of the dipped headlights of an Mitsubishi Outlander Sport must be done for a ordinary safety purpose. Whether it’s for you, or for the other users you come across during your night trips. In reality, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to anticipate a curve badly. In contrast, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is consequently fundamental for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Mitsubishi Outlander Sport for law reasons
In addition to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another regulation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Mitsubishi Outlander Sport?
We will now move on to the part that concerns you the most in this content page, how to adjust the low beams of his Mitsubishi Outlander Sport? This setting may seem a bit complex, but if you stick to the guidelines you should be able to do it without too much problem.
Preparations to set the low beam of a Mitsubishi Outlander Sport
Firstly, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure precisely.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Mitsubishi Outlander Sport
Once your automobile is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the guidelines to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Mitsubishi Outlander Sport (they are commonly marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, examine that the low beam setting of your Mitsubishi Outlander Sport is consistent on the road, do not hesitate to examine that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Mitsubishi Outlander Sport, please go through our content page on this subject.
To discover more tips on the Mitsubishi Outlander Sport, take a look at the Mitsubishi Outlander Sport category.
